Inspire 1 V2.0 calibration stuck at 94%

[shomci]

hey,

my I1 v2.0 has been crashed and water damaged.
calibration stuck at 94% (when the bird is pre-cooled)

does anybody know how to force it to complete the calibration?

 

[Starz]

And it still flys after all that? Maybe I'll learn a new trick on this one.

 

[shomci]

And it still flys after all that? Maybe I'll learn a new trick on this one.

nope...
it turns on, (4x yellow lights), i got telemetry, etc.
when i try calibration it only goes up to 94%. (and then one of the leds goes dark.)

what i want is to get the calibration done, so i can identify which motor ESCs are bad.

 

[Starz]

That sounds like a project. GL.

 

[The Editor]

hey,

my I1 v2.0 has been crashed and water damaged.
calibration stuck at 94% (when the bird is pre-cooled)

does anybody know how to force it to complete the calibration?

Damaged lightbridge cooling fan fin.
Common problem after a crash. The impeller imbalance causes micro vibrations which prevent the IMU from completing a calibration.
Covered before on the forum (several times).

 

[shomci]

Damaged lightbridge cooling fan fin.
Common problem after a crash. The impeller imbalance causes micro vibrations which prevent the IMU from completing a calibration.
Covered before on the forum (several times).

Yeah, I read that somewhere.
I disconnected the fan, let the aircraft cool around 30 mins outside (4 celsius), turned on, and 94% again..
Any other ideas maybe?