Inspire 1v2 + Dji 03 air unit

[Markus_Walker77]

Hello! I have recently acquired an Inspire 1v2 and would like to mount a Dji 03 air unit as an additional fpv camera.

In the nose cone of the drone there is an available 6 pin socket. Does anybody know what is the purpose of this socket, and can the air unit be plugged into it with the right connector? I have seen on YT this mod being done on the Inspire 2 which has an available 4 pin connector close to the battery.

Has this mod been attempted before? Or if otherwise, what would be the best way to power up the unit without the need of an additional battery.

Thank you anticipated!

 

[amets15]

Hello,

I don't know if you're still going with this idea, but in the end, I decided to solder two wires directly to the two large pins that stick out in the battery bay. And suplly the O3 with this two cables.

 

[megamattzero]

I ended up buying a Inspire 1 recently in 2025. Did you manage to get a FPV camera on it for pilot view? Im looking to have the second operator control only camera gimbal while pilot can see front view only while flying