Inspire 2 Thermal Camera..maybe..someday?




Unauthorized advertising removed by moderator.
 

Attachments

  • IMG_20170622_110005.jpg
    2.1 MB · Views: 26


I recently contacted a Natural Gas Co in my area to inquire about flying their right of ways for tree branches and other overgrowth. Apparently these right of ways are flown 6 times a year with helicopters(very expensive). They were intrigued, but said if I could provide gas detection, that would be worth my coming in for a chat. I priced the latest and greatest small gas detection camera(3.1Lbs.) and a uav(built around the camera) to handle it with all the software/hardware to go with it..................$89,695.00. flight time only 15 to 20 min. too.....Whata...Whata.....
Very serious business here. I might see if I can land a contract....pre-purchase. Very scary business here. Very serious money here.
 
Hello Freedom55 and everyone else.

I represent www.dronexpert.nl and we make a gimbal designed to accept the FLIR VUE line of sensors, and mount on the back of the Inspire 1 or 2. I would be very glad to chat with anyone who would like to know more. The Inspire 1 can power the gimbal internally, while the I2 requires a 6s external pack, as you can see.

Best part - real time telemetry from both thermal and visual sensors!

Thank you for your interest. I welcome your questions.



 
Reactions: Raphael Dahan, imaspireFR and Florida Drone Supply
Very interesting!
 
Reactions: SanCap and Eskin_Drones
Droneyboy said:
Looking for FLIR G300a mount on anything less expensive than a $41,195 drone from Switzerland.
But I do like the option of other FLIRs on the I2.....................
Click to expand...

Yeah, that's a bit bigger than what we're carrying.

For thermal work, I believe I can claim to be, by far, the least expensive way to get two sensors in the air at the same time. US customers can specify the 30hz FLIR models, because I perform the final assembly domestically.
 
Inspire 2 with FLIR solution, full gimbal and camera sensor ground control capability, dual controller setup - Drones Plus Dallas | Same-Day Repair

M600 with ICI infrared camera support and full gimbal plus camera ground control capability, this product allows for all of the ICI, IR USB cameras to integrate onto a M600 or their industrial drone the HALO and provides dual camera integration, visible plus IR - Sensor Control Module | Thermal Infrared UAV Remote Management System | Infrared Cameras Inc.

ICI has the only non FLIR color gas detection camera, Mirage HC, on the market which meets API specs, and it is capable of mounting on either their HALO drone (fully DJI A3 compatible and uses DJI controllers) or an M600 - Mirage HC | Optical Gas Imaging (OGI) Calibrated Thermal Camera with Temperature Measurement | Infrared Cameras Inc.

Either ICI or Copter Source can integrate these ICI products onto an M600 - Collections

I hope this information helps our forum members who are looking for IR solutions.
 
You must log in or register to reply here.

Similar threads

( SOLD )Used Zenmuse XT 13mm, 640x512 Radiometric Thermal Camera ( SOLD )
Replies
0
Views
933
Classifieds
FlFlyer
( SOLD )DJI Inspire 1 PRO - PLUS Flir Zenmuse XT Camera & Zenmuse X5 Camera ( SOLD )
Replies
2
Views
1K
Classifieds
FlFlyer
D
Wanted; Gimbal Camera Vibration Absorbing Board for DJI Inspire 1
Replies
4
Views
410
Classifieds
niki
( SOLD )Zenmuse X5 ( SOLD )
Replies
0
Views
361
Classifieds
FlFlyer
J
POI - Orbit and FlyPast - Inspire 2
Replies
2
Views
1K
Inspire 2 Discussion
jmm123
J
Menu
Log in
Register