Inspire Parts for sale
- Thread starter calde315
- Start date
Let me know what you need. I don't have everything in front of me, but post what you're looking for and I'll get back to you with pictures if possible. Should have quite a bit of stuff as this is one I parted out a while back. V1 I believe, but camo carbon arms so not the original. Thanks!
Do you have the x3 still mate
EDIT: Got everything out for a general picture. Can take more detailed pictures as there is interest. I have posted asking prices behind the item, looked at cheapest prices on eBay and tried to beat those. Feel free to shoot me a reasonable offer. Shipping can be discussed, on smaller things I don't mind paying for it, other larger, more expensive things I'd be willing to split (within US). Located in Minnesota and would prefer to ship within the US, but not opposed to checking into international quotes as long as buyer pays.
I use PayPal as it's the safest I've come across for both parties.
DJI X3 Camera/Gimbal, was backup, is in like new condition with very little time - DJI ND8 filter and clear --- $375
Complete right boom/arm (if looking at the front of the craft) --- SOLD with landing gear
Left boom arm with wiring --- $80
Support struts --- SOLD
Top cover with GPS and status light --- $55
Main board/power distribution (where the battery plugs into) --- $100
Vision Positioning Module --- $35
Center frame assembly/landing gear motor --- SOLD
N-Core/Lightbridge controller module --- $300
Motors with ESCs (3 left) --- $75 a piece
Landing gear --- SOLD
Nose cone and arm supports --- SOLD
Custom carbon fiber transmitter mount for phone/tablet --- $10
I assume you're asking PerthPilot how much. I'm in the US and have sold my X3. List has been updated, I was on vacation so I took a little hiatus.
- Joined
- Aug 7, 2013
- Messages
- 10,851
- Reaction score
- 5,717
OK, to stop confusion (and hijacking the thread)
Please can @PerthPilot and @Karl hubay please take this offline as this was @calde315 thread and I am assuming he still has some parts for sale.
Thanks
Please can @PerthPilot and @Karl hubay please take this offline as this was @calde315 thread and I am assuming he still has some parts for sale.
Thanks
Hi guys, let me double check what I have left. I just tested the NCore in my Inpsire but it appears I have a buyer. I'll let you know if that falls through, but there were a couple in line before jaymie. Prices are on the first page, shipping is on the buyer. Please PM with your postal code K3vin so that I can check.
I've got an RC for sale. Good condition. Make me an offer if you're still looking
All -
I've updated prices and what I currently have left, which isn't much. As mentioned I'll get some updated pictures. VPS, main battery hub, 4 3510 motors and ESCs and the white top cover and GPS is all I have available.
I've updated prices and what I currently have left, which isn't much. As mentioned I'll get some updated pictures. VPS, main battery hub, 4 3510 motors and ESCs and the white top cover and GPS is all I have available.
Hey, I need the airframe bottom cover (part with white strips), u got it?Let me know what you need. I don't have everything in front of me, but post what you're looking for and I'll get back to you with pictures if possible. Should have quite a bit of stuff as this is one I parted out a while back. V1 I believe, but camo carbon arms so not the original. Thanks!
EDIT: Got everything out for a general picture. Can take more detailed pictures as there is interest. I have posted asking prices behind the item, looked at cheapest prices on eBay and tried to beat those. Feel free to shoot me a reasonable offer. Shipping can be discussed, on smaller things I don't mind paying for it, other larger, more expensive things I'd be willing to split (within US). Located in Minnesota and would prefer to ship within the US, but not opposed to checking into international quotes as long as buyer pays.
I use PayPal as it's the safest I've come across for both parties.
DJI X3 Camera/Gimbal, was backup, is in like new condition with very little time - DJI ND8 filter and clear --- SOLD
Complete right boom/arm (if looking at the front of the craft) --- SOLD with landing gear
Left boom arm with wiring --- SOLD
Support struts --- SOLD
Top cover with GPS and status light --- $55
Main board/power distribution (where the battery plugs into) --- $75
Vision Positioning Module --- $35
Center frame assembly/landing gear motor --- SOLD
N-Core/Lightbridge controller module --- SOLD
Motors with ESCs ---- Have all 4 available, although two (1CW and 1 CCW) have some what appears to be light burning on the coils. I'll take pictures and post here in the next few days. The other two do not show this. $75 a motor/esc, $250 for the whole set.
Landing gear --- SOLD
Nose cone and arm supports --- SOLD
Custom carbon fiber transmitter mount for phone/tablet --- SOLD
I don't have the white arm pieces anymore. Unsure of the other part you're talking about
Sorry I don't believe I have that. That may be a part you just want to buy brand new anyhow. It's pretty cheap, all things considered with the Inspire
I should have corrected myself, sorry. I have it, but it depends on if this recently acquired Inspire I got needs it or not. I won't know for a bit though. May just want to order a new one for $20 because by the time I ship it, and what I'll want for it, it'll be close to $20 anyhow.
Last edited:
Sorry, Arin was traveling and didn't see your response till now. I had my RC in for repair and needed one for a course I was taking. Fortunately for me it arrived back on time. Unfortunately for you, I no longer need it, Sorry and thank you!
Similar threads
