Looking for Inspire 1 V2.0 WormDrive Motor and LB module

S

shomci

Joined

Mar 3, 2017

Messages

35

Reaction score

7

Age

37

• Feb 17, 2018

• #1

Hi,

I am looking for 100% working:
Worm Drive motor (rod and frame not needed)

And lightbridge module with compass from V2.0 (V1.0 would not work)

Not a problem if these are from crash landed copters - HOWEVER they must be in 100% working condition (tested)

Let me know.
Thanks.

 

calde315

Joined

Jan 16, 2016

Messages

193

Reaction score

29

Location

Minnesota

• Feb 17, 2018

• #2

I have a worm gear drive motor but unsure the voltage at which it runs at to test it

 

Reactions: shomci

S

shomci

Joined

Mar 3, 2017

Messages

35

Reaction score

7

Age

37

• Feb 17, 2018

• #3

calde315 said:

I have a worm gear drive motor but unsure the voltage at which it runs at to test it

Click to expand...

not sure either. anybody knows how to test it?

 

calde315

Joined

Jan 16, 2016

Messages

193

Reaction score

29

Location

Minnesota

• Feb 17, 2018

• #4

I can look into it later today. Here is the unit I have.

 

Reactions: shomci

TruGreen

Joined

Jan 20, 2018

Messages

641

Reaction score

125

Age

37

Location

Hemet, California

• Feb 17, 2018

• #5

when i tested one i bought cheap on ebay, i just unplugged the one on my bird, and plugged the new in. then cycled it a few times

 

calde315

Joined

Jan 16, 2016

Messages

193

Reaction score

29

Location

Minnesota

• Feb 17, 2018

• #6

TruGreen said:

when i tested one i bought cheap on ebay, i just unplugged the one on my bird, and plugged the new in. then cycled it a few times

Click to expand...

I’ll check into that tonight. Should be able to quickly see the voltage going to that and replicate on a power supply next time

 

Reactions: shomci

S

shomci

Joined

Mar 3, 2017

Messages

35

Reaction score

7

Age

37

• Feb 17, 2018

• #7

calde315 said:

I’ll check into that tonight. Should be able to quickly see the voltage going to that and replicate on a power supply next time

Click to expand...

careful not to fry it

 

TruGreen

Joined

Jan 20, 2018

Messages

641

Reaction score

125

Age

37

Location

Hemet, California

• Feb 17, 2018

• #8

shomci said:

careful not to fry it

Click to expand...

thats why i used my bird, simple and easy no worry of damage

 

Reactions: shomci

M

Mavicpilot

Joined

Feb 10, 2018

Messages

2

Reaction score

0

Age

44

• Feb 17, 2018

• #9

I have tested worm drive servos with just a regular receiver. I just hooked up a 1s pack to the RX.

 

calde315

Joined

Jan 16, 2016

Messages

193

Reaction score

29

Location

Minnesota

• Feb 17, 2018

• #10

shomci I tested it on one of my Inspires today and the motor works. Since there is no screw or anything to tell it to stop, it just keeps running. I don't think that's a problem. Let me know if you want it.

 

Reactions: shomci

S

shomci

Joined

Mar 3, 2017

Messages

35

Reaction score

7

Age

37

• Feb 18, 2018

• #11

calde315 said:

shomci I tested it on one of my Inspires today and the motor works. Since there is no screw or anything to tell it to stop, it just keeps running. I don't think that's a problem. Let me know if you want it.

Click to expand...

hope it would work in mine
let's continue in PM

 

A

avance24

Joined

Nov 7, 2018

Messages

16

Reaction score

1

Age

72

• Jan 20, 2019

• #12

This is old I know... but why wouldn't a V1 Ncore not work? I have been assured that they are the same (same firmware etc)