Moving camera up and down with dial.

[Richard Negley]

I recently bought the Inspire 1. Have loaded all the firmware to both the aircraft and RC. In moving the camera up and down with the dial, it appears irratic. At some cases when I roll the dial up fast it may go down or jerk and the oposite may occur when I roll the dial down. Surely this is not normal and how do I fix it? Any thoughts would be appreciated.

 

[msinger]

Did you calibrate the remote controller in the DJI GO app? If so, do it again.

 

[Richard Negley]

Thanks for the reply.....I did but will do it again.

 

[Richard Negley]

Thanks for the reply.....I did but will do it again.

I am also having problems with the App disconnecting during flight. Don't think they are related but thought I would throw that out as well. Am looking through the forum for similar threads/replys.

 

[jon b]

The daily takes practice to get good at it and that said, I still screw up and blow a shot here and there. If you're single handed, you might try one of the many 3rd party apps out there for assistance in camera control. Lots covered up here.

 

[Richard Negley]

As it turned out, calebrating the RC again INCLUDING THE WHEEL did the trick. thanks MSINGER.