I updated my inspire 1 to the latest version. Prior to updating, I fitted the X3 to the Osmo and fired it up. Camera sprung into action and did its calibrating routine. After updating the inspire 1 to the latest update, The X3 does nothing on starting the Osmo. everything on the Osmo works apart from the camera angle control button.
The X3 head has sound from inside the body and then the fan kicking in after about a minute or so. Just no movement of the X3 camera, just limp not springing into life when the Osmo is switched on.
Is my very latest update ok for working the Osmo with the i1 X3 or is there a further upgrade needed to tha camera to operate with the Osmo.
Cant understand why it worked ok and started calibrating as soon as switched on on a much lower firmware. Before updating to 1.3.0.00 then 1.5 then to 1.6.
Hoping it is an easy fix.
Cheers
Ian
The X3 head has sound from inside the body and then the fan kicking in after about a minute or so. Just no movement of the X3 camera, just limp not springing into life when the Osmo is switched on.
Is my very latest update ok for working the Osmo with the i1 X3 or is there a further upgrade needed to tha camera to operate with the Osmo.
Cant understand why it worked ok and started calibrating as soon as switched on on a much lower firmware. Before updating to 1.3.0.00 then 1.5 then to 1.6.
Hoping it is an easy fix.
Cheers
Ian