Removing body

Rickesco · Jun 1, 2015

Hey Guys and Gals,

Can someone tell me what type of screwdriver (size) bit it is for the screws in the rear body ? I was able to remove the fronts ones but now I'm stuck with no bits.
Thanks

Rick

Blue Bird · Jun 1, 2015

If your careful, the size that will fit is a 1.5 metric torx bit. You can get a useful kit off of amazon that will suffice most of the Inspire 1's screws and hardware.
http://www.amazon.com/Wiha-26793-Pi...567&sr=8-9&keywords=mini+torx+screwdriver+set

http://www.amazon.com/Anytime-Tools...99&sr=8-1&keywords=mini+allen+screwdriver+set

Those should do the job. Good luck..

Rickesco · Jun 2, 2015

Blue Bird said:
If your careful, the size that will fit is a 1.5 metric torx bit. You can get a useful kit off of amazon that will suffice most of the Inspire 1's screws and hardware.
http://www.amazon.com/Wiha-26793-Pi...567&sr=8-9&keywords=mini+torx+screwdriver+set

http://www.amazon.com/Anytime-Tools...99&sr=8-1&keywords=mini+allen+screwdriver+set

Those should do the job. Good luck..

Thanks Blue Bird..

Removing body

Rickesco

Blue Bird

Rickesco

Similar threads

Privacy & Transparency

Privacy & Transparency