Yaw and roll arms for the Inspire x3 camera gimbal.

[Droneted]

I may have a source for these. They will come from gimbals so they will have the casing for the motor still in them which will save time. They are like new. If there is no interest I will tell my supplier not to bother.
The cost will be about $50.

 

[MrMR]

Are you still able to source these?

 

[Droneted]

No. I ran out some time ago. Sorry

 

[MrMR]

It was worth a try. Thanks for getting back.

 

[Droneted]

You can use the yaw or roll arm off an x3 for the OSMO. same arms but different motors . If you can find an old OSMO gimbal let me know and I will let you know what you have to do to use it

 

[MrMR]

It did cross my mind. Will do.

 

[Unc1980]

Hi, tell me please- is YAW ARM Gimbal DJI OSMO X3 black and its flex connecting tape full compatible with YAW ARM Gimbal DJI X3 Inspire white and its flex connecting tape ? Do you know and could you confirm that? What should I pay attention to during fixing it?

You can use the yaw or roll arm off an x3 for the OSMO. same arms but different motors . If you can find an old OSMO gimbal let me know and I will let you know what you have to do to use it