Recent content by Rotofoto

Check your remote is not set to slave mode ?

Perhaps the remote is set to slave and is only controlling the gimbal, just a thought

Ok thanks, that's a shame I thought it may have been something that was hidden in the lightroom menu. Anyway thanks I will investigate the passport software sounds promising. Really appreciate your help

Hi guy's, I would like to apply the jpeg camera profiles (landscape, art,ect)to my raw photos in lightroom. Unfortunately when I go to camera profiles it shows embedded and the drop down menu of different styles is not available. I shoot in jpeg /raw and only import the raw any idea's as to how...

Ok turns out the was hdmi unit was bad and the remote that was shipped was in slave mode. which you can't change without getting into the app via the hdmi. So cut a long story short new remote re linked with inspire problem solved :)

Thanks mate yes can't wait, hopefully this is any easy fix. Will try the reinstall process again can't hurt

Mine fails to even bring the app up on the device, nothing happens. If I tap on the app it opens but the enter camera icon is grey and there is no live feed or telemetry.

Rural New Zealand no airport for 50km.phantom has no issues flying in this area. very frustrating thanks for the tips doesn't hurt to double check

Yes gimbal dose the calibration dance, just no live feed or any response from the app

Flashing green when in flight mode blue when in travel,remote solid green.

Thanks have tried that,my understanding is the remote should still power up the motors without the app regardless. So I'm guessing there is a controller issues

Hi guys,I'm wondering if I'm doing something wrong comming from a phantom 3 I thought the start up protocol would be the same. Unfortunately when I plug the usb in the app fails to initiate have tried multiple devices/cables to no avail. Also although I have sold green on the remote status bar...