Anyone Know What's Happening with these ProRes files Off the Inspire 2 x7 with 960gb CineSSD? Feed to the RC was perfect.
- Thread starter SunofaNarc
- Start date
Those cards require the newest firmware to function. Are you on .500?
I've shot two car spots on that bridge and the winds there can be totally insane.
I've shot two car spots on that bridge and the winds there can be totally insane.
- Joined
- Dec 12, 2018
- Messages
- 57
- Reaction score
- 22
- Age
- 54
Hhm, maybe it could be your
# Vibration Damper Board contacts worn
# Contacts itself loose under heavy vibration
# the Dampers getting a bit worn out, thus inducing more Vibrations than above average
Good luck!
# Vibration Damper Board contacts worn
# Contacts itself loose under heavy vibration
# the Dampers getting a bit worn out, thus inducing more Vibrations than above average
Good luck!
- Joined
- Jan 28, 2019
- Messages
- 35
- Reaction score
- 10
- Age
- 43
I agree with the above, and would add that the X7/X5s, in my experience, likes to be attached with it's clockwise twist past the lock, then pulled a little back counter-clockwise. Same with attaching lenses- both play better when not at the end of the turn.
