Figbar and I have noticed that when we set our cameras to NTSC it switches back to PAL on its own.
Any one else...?
Any one else...?
Camera Settings Issue
- Thread starter InspiredOne
- Start date
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
In addition to this, none of the video files or photos appear in my album...they do appear in my flight log and function properly...there is an indication videos have been recorded with snapshots shown. I reformatted my card and shot more video/photos and nothing still appears in my album to evaluate...this functioned seamlessly with the previous firmware. And as InspiredOne mentioned, on my general settings, even after I select NTSC, it reverts back to PAL.
Any others having this issue? It might be worth checking. Thanks,
Any others having this issue? It might be worth checking. Thanks,
My album isn't showing anything either--never has. I presumed it was because I hadn't put anything in it. So that's an automatic function?
Mine will do that as well if I'm not connected to the AC. When connected it doesn't flip back to PAL
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
Yes...they should show up...as long as you are connected to your Inspire...both RC and Inspire are on, you can quickly check what you have shot...it's a great way to evaluate...I've never done it while flying, but I think you can do this as well. Again, this was fine on the previous version.
So there are 2 issues that we have...
1) General settings - selecting NTSC is not working
2) Videos and Photos are not showing up in our albums.
So there are 2 issues that we have...
1) General settings - selecting NTSC is not working
2) Videos and Photos are not showing up in our albums.
The photos and videos don't show up in your album unless you put them there. When you take a photo and hit the play back button you will see a download option. Click that and hey-presto! your photo will be in your album.
- Joined
- Jan 20, 2015
- Messages
- 501
- Reaction score
- 182
Connected to the AC? Not sure what that is? But I am fully connected to everything...the Remote Control (RC), my I Pad Air and linked the Inspire 1...under general settings, it seems like the default is PAL...I change this to NTSC, get out of that menu, return to it and it is back to PAL>
- Joined
- Mar 20, 2015
- Messages
- 138
- Reaction score
- 53
- Age
- 46
- Location
- New Zealand
- Website
- www.themediaclinic.co.nz
Yeah, I work in PAL, but even though it's set to PAL, I have no PAL framer rates, only NTSC's 30 & 60fps. Very annoying. Hope they fix it soon. I don't like working with mixed frame rates on one timeline if I don't have to...
