Inspire 1 Pro Rattle :(

[jamesb0140]

Hi everyone,

Need some desperate help. My inspire 1 pro has developed a rattle after a job yesterday. Wondering if you guys could help me with the solution. I think it may just be a loose bolt or something but not entirely sure. See link below for a video.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[The Editor]

Hi everyone,

Need some desperate help. My inspire 1 pro has developed a rattle after a job yesterday. Wondering if you guys could help me with the solution. I think it may just be a loose bolt or something but not entirely sure. See link below for a video.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Does it still do not with the camera removed?
If so I would suspect a broken fin on the light bridge cooling fan which will rattle as it will be out of balance but difficult to tell from the video.

 

[jamesb0140]

Thanks for the reply! I managed to figure it out. The screw on the right of the gimbal which connects to the camera wasn't connected which caused the rattle. It was a real simple fix. Just lined it up and screwed it back in with an allen very and now its fine.

 

[Advexure]

Thanks for the reply! I managed to figure it out. The screw on the right of the gimbal which connects to the camera wasn't connected which caused the rattle. It was a real simple fix. Just lined it up and screwed it back in with an allen very and now its fine.

Good to hear!! Safe flying.