Inspire 2 RC Settings for DronePan Operation can anyone help

George Brown · May 18, 2017

RC settings for Inspire 2 to operate DronePan.
Does not work switches to Camera View fine.
No F position used on P3 Pro and Inspire 1 worked well.
Any help would be appreciated

deltalimatango · May 24, 2017

George Brown said:
RC settings for Inspire 2 to operate DronePan.
Does not work switches to Camera View fine.
No F position used on P3 Pro and Inspire 1 worked well.
Any help would be appreciated

Can you make complete and informative sentences? It is really hard to understand what you are trying to say. At least for me it is.

NickU · May 24, 2017

I haven't flown using drone pan & the I2, but on the Inspire 2 P position (P-GPS) is the equivalent of Inspire 1 F Position if that's any help.

Check you have enabled the intelligent flight modes in your DJI Go4 app, otherwise the switch doesn't change modes. (if you move the switch for P to S to A (ATTI) and it changes the on-screen flight mode from P-GPS to Sport to ATTI, then the switch is enabled.

Hope that's some help for you!

SanCap · May 24, 2017

Drone Pan does not function with my inspire 2. It hangs up when the message says switch to F mode. Apparently the app developer does not know that the I2 is different than the I1.

George Brown · May 24, 2017

SanCap said:
Drone Pan does not function with my inspire 2. It hangs up when the message says switch to F mode. Apparently the app developer does not know that the I2 is different than the I1.

Hi San Cap
Thank you this is what I get on the Inspire 2.
Have been on the DronePan blog and they know about this. But I also think it is DJI maybe when they do POI Waypoints for Inspire 2 it will come back.
Thanks and Regards

SanCap · May 24, 2017

George Brown said:
Hi San Cap
Thank you this is what I get on the Inspire 2.
Have been on the DronePan blog and they know about this. But I also think it is DJI maybe when they do POI Waypoints for Inspire 2 it will come back.
Thanks and Regards

I used to use litchi and autopilot for my 360° panoramas, now I just do it manually. I can actually get it done quicker than the 3rd party apps.

George Brown · May 25, 2017

SanCap said:
I used to use litchi and autopilot for my 360° panoramas, now I just do it manually. I can actually get it done quicker than the 3rd party apps.

Thanks going to try Litchi it seems to do the Inspire 1 and Inspire 2. Have an Osmo as well not tried Pano with that yet.

Raphael Dahan · Sep 9, 2017

SanCap said:
I used to use litchi and autopilot for my 360° panoramas, now I just do it manually. I can actually get it done quicker than the 3rd party apps.

Hi SanCap, now we are in September, did you tried the autopilot app. for inspire 2, if yes, is it works correctly for all modes?
Thanks in advance.

SanCap · Sep 9, 2017

Raphael Dahan said:
Hi SanCap, now we are in September, did you tried the autopilot app. for inspire 2, if yes, is it works correctly for all modes?
Thanks in advance.

I have not tried it lately, after all this hurricane stuff passes I will give it a try.

Raphael Dahan · Sep 9, 2017

SanCap said:
I have not tried it lately, after all this hurricane stuff passes I will give it a try.

Thanks, take care!!

jt20165 · Sep 9, 2017

SanCap good luck with Irma our thoughts are with you

Figbar · Jan 27, 2018

Hey San Cap...I lost your e-mail. I'm going to be on Sanibel next week...if you are doing any flying around the island, would love to check out your fleet. My email now is [email protected]. Thanks. Mike Meyer, Columbus, Ohio