Installed FPVLR kit now have no connection

Ozziepauly

Joined
Jan 2, 2014
Messages
37
Reaction score
17
Location
Melbourne, Australia
Hi Guys, I thought I had correctly installed the long range FPVLR kit. Now I have no connection from the RC to craft. After install should I have done a firmware update. The RC starts beeping after 30 seconds. Any help would be much appreciated.
 
Last edited:
Do you have any control of the aircraft at all? Are you sure you connected the ribbon correctly? You didn't accidentally not allow the device to connect to your tablet/phone upon the initial start up of the app?
The ribbon I'm referring to can be seen at 2 minutes 15 seconds on the video bellow ~

 
Reactions: Chnjab and turbodronepilot
The ribbon was not damaged and was re installed correctly
 
You probably won't want to do this but I suggest reopening the RC and checking over everything very very carefully. Even check over areas that you didn't touch.
 
You must log in or register to reply here.

Similar threads

B
Inspire 1 x5 limp gimbal
Replies
2
Views
2K
Inspire 1 Help
Brian Fist
B
SOLD - X5 with Osmo Pro Kit and X5 Gimbal Mounting Bracket (Trade for an Ipad?)
Replies
6
Views
2K
Classifieds
rmb
R
K
Inspire 1 XT camera issues
Replies
4
Views
3K
Inspire 1 Help
Kalairbo
K
Following the data path to erroneous NFZ's....
Replies
6
Views
2K
Inspire 1 Discussion
Donnie Frank
S
No image transfer on inspire 1
Replies
1
Views
1K
Inspire 1 Help
Donnie Frank
Menu
Log in
Register