Landing Gear Bent Part

D

Dan Dobbins

Joined

Nov 1, 2015

Messages

7

Reaction score

0

Age

71

• Nov 7, 2015

• #1

I crashed my I1 and have one broken motor arm to repair. I also bent the metal yoke that translates up and down the shaft to transform the gear, so one gear side is higher that the other. Looking for a replacement metal yoke part and the grey plastic part source and instructions to disassmble this area.

 

Attachments

• Inspire Part.jpg

  69.2 KB · Views: 33
• thumb_IMG_0306_1024.jpg

  203.1 KB · Views: 31

Alastair

Joined

Jul 15, 2015

Messages

347

Reaction score

96

Location

Prince Edward Island, Canada

• Nov 7, 2015

• #2

Any details on what caused the crash? Sometimes we all can learn from people's misfortunes. Sorry to hear about yours. You might have to end up sending it back to DJI for the arm replacement. There is a jig that they use to properly align the arms.

 

Last edited: Apr 7, 2016

D

Dan Dobbins

Joined

Nov 1, 2015

Messages

7

Reaction score

0

Age

71

• Nov 7, 2015

• #3

Alastair said:

Any details any details on what caused the crash? Sometimes we all can learn from people's misfortunes. Sorry to hear about yours. You might have to end up sending it back to DJI for the arm replacement. There is a jig that they use to properly align thr arms.

Click to expand...

The crash was at 100 feet altitude when the pilot flew into trees

 

Alastair

Joined

Jul 15, 2015

Messages

347

Reaction score

96

Location

Prince Edward Island, Canada

• Nov 7, 2015

• #4

Ah, that's too bad. You might find parts on eBay and be able to repair it but the alignment is a critical part of it.