I would like to have some help understanding the FW process on Inspire 1. It seems it was successful but I still would like to better understand the process. First of all the following is the results from WM610_FW_LOG_AB.txt
========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40_Fcam.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.09.01.10.bin
Upgrading ...
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.09.01.10.bin
Upgrading ...
Result: Success.
========== 2016.07.08 09:26:36 =====================
Packet: WM610_FW_V01.09.01.30.bin
Upgrading ...
Result: Success.
This was on a freshly formatted SD card which has never been used with the inspire before. What I find confusing it seems to show that in 2014 the camera? was upgraded to 01.06.00.40 and the aircraft was updated to 1.09.10.10, which did not finish and then again to 01.09.01.10 which did complete. This is a new T601 less than a month old so the 2014.01.01 is confusing. Also I do not understand where this is coming from since this was virgin SD card.
Also I do not get any of the sounds or lights I expected to hear and see. All I get is a yellow flashing light. When I first got the Inspire I thought the FW update was not working and did not wait 25 minutes. Is this normal to not get any indication that it is updating or that it is done?
After the update I have:
App 2.8.4
Aircraft 1.9.1.30
RC 1.6.0
Camera 1.8.1.00
No mention of the battery. And that brings me to the last question. Do I have to do this 25 minute update for each and every battery I own? I am about to buy a new battery, will I need to update the battery when it comes in?
I will post another message with the hidden files and the errors messages it contains.