Wanting to find

[DB$Tim]

Wanting to find or buy......the original props NON QR ...obviously I need everything to convert it over form QR...cannot seem to locate and yes have Googled, all comes back is QR stuff!

Any ideas?

 

[The Editor]

Wanting to find or buy......the original props NON QR ...obviously I need everything to convert it over form QR...cannot seem to locate and yes have Googled, all comes back is QR stuff!

Any ideas?

Took me slightly less than 10 seconds

Buy Inspire 1 - 1345 Self-tightening Propellers

2 Pairs 1345 CF Props Self-Tightening Propeller CW+CCW For DJI Inspire 1 WST | eBay

 

[NH Phantom]

Wanting to find or buy......the original props NON QR ...obviously I need everything to convert it over form QR...cannot seem to locate and yes have Googled, all comes back is QR stuff!

Any ideas?

I got some directly from dji recently Get the prop locks too

 

[DB$Tim]

My bad should have said the props are there I need the entire kit to attach the prop to the motor...or?


My understanding there is something more than just the prop shaft.....or ?


I have never seen what the old style screw on has on top of the motor....

 

[SanCap]

My bad should have said the props are there I need the entire kit to attach the prop to the motor...or?


My understanding there is something more than just the prop shaft.....or ?


I have never seen what the old style screw on has on top of the motor....

All you need is the self tightening props and the prop locks. Buy Inspire 1 - Propeller Lock | DJI Store . You will remove all the QR mounting hardware from the motors and screw on the original style props.

 

[DB$Tim]

Sweet...thank you all very much.......I just don't really like the Qr's and it takes nothing to put props on

 

[DB$Tim]

OOPS...why would DJI say this Not compatible...I have V1,,,just wanting to learn a bit

Inspire 1 - 1345 Self-tightening Propellers (Yellow Stripes)
USD $10.00

• DJI 1345 Self-tightening Props
• Compatible with the Inspire 1

Note: Not compatible with Inspire 1 V2.0 and Inspire 1 Pro.

 

[NH Phantom]

OOPS...why would DJI say this Not compatible...I have V1,,,just wanting to learn a bit

Inspire 1 - 1345 Self-tightening Propellers (Yellow Stripes)
USD $10.00

• DJI 1345 Self-tightening Props
• Compatible with the Inspire 1

Note: Not compatible with Inspire 1 V2.0 and Inspire 1 Pro.

Not compatible with the QR setup. Just take the QR mounts off and you'll be all set

 

[The Editor]

OOPS...why would DJI say this Not compatible...I have V1,,,just wanting to learn a bit

Inspire 1 - 1345 Self-tightening Propellers (Yellow Stripes)
USD $10.00

• DJI 1345 Self-tightening Props
• Compatible with the Inspire 1

Note: Not compatible with Inspire 1 V2.0 and Inspire 1 Pro.

Because the V2 and pro have quick release plates fitted.
You just need to remove them and they will thread onto the shaft

 

[DB$Tim]

Thank you again

 

[SanCap]

I love my self tightening props on both my I1 V1 and I 1 V2 pro's!