My x3 gimbal will only work while I put it in the free mode. While in free mode it locks on and stays there no matter how I move the drone. While in follow mode it moves around somewhat with the drone but not locked in like it should be. Fpv works the same way as follow. Really makes it hard to do any filming with the camera all over the place. It will center properly when I hit the center option. I have updated the firmware on the controller and bird and have also downgraded the firmware to 1.08 with no luck. The gimbal will make its buzz noise when picking different modes. Any advise? I am beginning to think maybe the gimbal is bad.
thanks
Jeff
thanks
Jeff