Recently purchased a used Inspire 1 with dual controllers. One of the controllers works fine and I can use the app to update the firmware, the other one, will not connect to the app at all. The USB port DOES give a charge to my phone when it is plugged in, which makes me think that the USB port...
Hi,
I have a DJI Matric 100 and yesterday I tried updating its firmware to version 1.3.1.
At first I tired updating with Assistant V2 using a pc, and everything was going fine until it failed with "connection error" and started beeping and the pc wont recognize the device anymore.
In Device...
Hi, I'm having an issue with my Inspire 2. My crystalsky monitor auto updated the DJI Go apps, and now the crystalsky won't see my Pro Res license. My old Ipad mini still has the same old software, and the Pro Res license works when I use that. Is there a way to delete the DJI Go 4 App with a...
This is a video showing my problem, description below
Hello fellow Inspire 1 junkies!! I’ve been reading posts on this forum for about a week now trying to correct an issue on my I1, but I’ve finally reached the point where I need to humbly ask for help.
My original problem was no image...
Overview
Date: 2018.04.18
Aircraft Firmware: V01.02.0100
Remote Controller Firmware: V01.01.0010
DJI GO 4 app: iOS V 4.2.12 or above, Android V 4.2.12 or above
What's New?
Added support for adjusting the maximum velocity of aircraft’s real-time pitch/roll, orientation, and throttle with the...
DJI has released a new update for the Crystal Sky monitor:
Pilot App - New Version (V0.5.1)
Added Master and Slave remote controller function
Added GPS coordinate display and format setting
Added obstacle avoidance radar interface
Added support for activating the aircraft
Added support for the...
Hey all,
I recently had to replace and X3 camera on my Inspire 1
Having owned ot for what seems like an eternity I stopped upgrading the firmware on the inspire right when DJI really started becoming big brother.
My Inspire is well out of warranty now ..... not that it was ever worth much.
I...
Hello all,
Firstly I'm new to flying the dji inspire one and so far I haven't been able to take off for two reasons
Firstly
It is asking for an update so following the online guide I put the bin file onto an sd card and put it into the gimble, the gimble goes limp ( see second problem for...
Hi guys, I made the jump to update my AC and RC after my dji go app recently auto updated (I know, silly mistake, its now going to be switched to manual updates).
Long story short after the initial dji go update to v3.0 i had TERRIBLE video lag which basically made the flight I had planned...
I've put In the new 1.9.... FW in and after doing so I can't get the gimbal to move but only like a half in to the right and to the left. I've downgraded back to 1.8 and back up to 1.9 and still having the same trouble.
Thanks a bunch, Calvin
Hi,
I got problem, my dji inspire 1 after firmware Update doesn't put wings up and the gimbal doesn't stabilize.
Please help me i got big problem with it.
Compare total your flight distance and how you rank among DJI flyers all over the world.
Got a summary for what you've done in the year of 2015, tried it yet? That makes a difference
DJI Forum|Try new "2016,I will.." movie templates. Update DJI GO now!
Hi,
I've spent hours searching and I have so far come up with no resolution. I unboxed my brand new Inspire 1 and proceeded to set up with the Go App, apparently the only way I can update the firmware for my aircraft. I went to the first on the list and updated the RC to the latest firmware...
Hi,
I have flown my I1 since february with X3 without issues. I am on the latest I1 (non-pro) fw v. 1.5.0.30.
Now I bought the X5 and have a question about how to proper update it . I will continue to use both X3 and X5 cams on the I1 (non-pro).
Which fw should I install now?
I have seen so...
As you see for the first point, which has caused many many many crashes..
1. Fixed battery level fluctuation issue.
2. The X3 gimbal on the Inspire 1 is now compatible with the Osmo. Note that you must attach X3 gimbal to the Inspire 1 before updating the firmware. Do not attach X3 gimbal to...