Camera Alignment Issue

[Ian Fraser]

My Camera is aligned just of centre.

Latest Firmware
IMU Calibration
Gimbal Calibration
Tried another Camera Same issue
Tried my Camera on another Inspire Same Issue?

So this problem is in both the Inspire 1 and the Camera?

I do have a Case with DJI their only answer is to ship it back. Surely there must be a way to correct this alignment issue without sending it back

 

[The Editor]

My Camera is aligned just of centre.

Latest Firmware
IMU Calibration
Gimbal Calibration
Tried another Camera Same issue
Tried my Camera on another Inspire Same Issue?

So this problem is in both the Inspire 1 and the Camera?

I do have a Case with DJI their only answer is to ship it back. Surely there must be a way to correct this alignment issue without sending it back

You say this happens on your camera on another Inspire AND on your Inspire with a different camera????
One or dual controller set-up? If dual have you done a stick calibration on slave?
Are you trying this in the same location?
Have you tried in an open area away from any external magnetic flex influences?

 

[Ian Fraser]

You say this happens on your camera on another Inspire AND on your Inspire with a different camera????
One or dual controller set-up? If dual have you done a stick calibration on slave?
Are you trying this in the same location?
Have you tried in an open area away from any external magnetic flex influences?

It has been tried in 2 locations. I spent some time at my dealer doing fault finding yesterday.

It is a Dual Control but I have never setup or connected the second controller

 

[The Editor]

It has been tried in 2 locations. I spent some time at my dealer doing fault finding yesterday.

It is a Dual Control but I have never setup or connected the second controller

It doesn't make any sense because you have eliminated both items....and yet they both exhibit the same fault!
Logic says it has to be either the Inspire or the Camera. Since both are interchangeable and the fault is still present it makes sense to look elsewhere.
Try calibrating your remote (if there is a small amount of yaw off-set calibration it may cause the gimbal to turn anticipating a yaw movement.)

 

[Outta Control]

Editor. You gonna need this.

 

[The Editor]

Editor. You gonna need this.

I crunch them like M&M's when I'm on here....

 

[Outta Control]

 

[RJ Evans]