CrystalSky not compatible - latest Inspire 2 firmware

cvanhoose · Jul 3, 2017

UPDATE: DJI has pushed the update for the CS.
I suggest using the official update. This was a temp fix.

DO NOT update to latest firmware if you need to use your Crystal Sky monitor. NOT compatible.
Unable to break the 100ft barrier.
There is no update to the Crystal Sky monitors currently.

The Editor · Jul 3, 2017

cvanhoose said:
DO NOT update to latest firmware if you need to use your Crystal Sky monitor. NOT compatible.
Unable to break the 100ft barrier.
There is no update to the Crystal Sky monitors currently.

I HAVE $12k in paperweights.

Have DJI done it again?

cvanhoose · Jul 3, 2017

Yes, I am unable to downgrade to the previous firmware also. So once you update, it will be a challenge if not possible to go back.
What I don't understand is that I was able to get a handful of test flights in a couple of days ago with no limits.
Now the waiting games starts for a new software update for these Crystal Sky monitors that I can not use.

Mark Taylor · Jul 3, 2017

Just a thought, but as a workaround, have you tried having a different device connected during power-up to remove the limits then switch to the crystalsky?

Far from ideal and obviously not a long tern solution but it may deal with the issue for the moment while you await new firmware ...

cvanhoose · Jul 3, 2017

After 1.5hrs of no tech help from DJI support. I found the DJIgo4 app.apk for android. I transferred it to an sd card and installed to the Crystal Sky. I now have 4.1.3 running. I am heading out for a test flight or 5 and will report back.

SanCap · Jul 3, 2017

Mark Taylor said:
Just a thought, but as a workaround, have you tried having a different device connected during power-up to remove the limits then switch to the crystalsky?

Far from ideal and obviously not a long tern solution but it may deal with the issue for the moment while you await new firmware ...

That worked for me but is ridiculous that it has to be done to get the CS to work.

cvanhoose · Jul 3, 2017

Confirmed. FIXED by installing .apk to Crystal Sky.

Runs great. No more limits and notifications.

cvanhoose · Jul 3, 2017

That being said......I have also installed a couple other apps

SanCap · Jul 3, 2017

cvanhoose said:
After 1.5hrs of no tech help from DJI support. I found the DJIgo4 app.apk for android. I transferred it to an sd card and installed to the Crystal Sky. I now have 4.1.3 running. I am heading out for a test flight or 5 and will report back.

Can you share the app.apk file or link?

cvanhoose · Jul 3, 2017

Free Download APK File of the DJI GO 4 v4.1.3 for Android - APK4Fun

SanCap · Jul 3, 2017

cvanhoose said:
Free Download APK File of the DJI GO 4 v4.1.3 for Android - APK4Fun

Thank You

SanCap · Jul 3, 2017

cvanhoose said:
After 1.5hrs of no tech help from DJI support. I found the DJIgo4 app.apk for android. I transferred it to an sd card and installed to the Crystal Sky. I now have 4.1.3 running. I am heading out for a test flight or 5 and will report back.

Did you just insert the card into one of the card slots on the CS?

cvanhoose · Jul 3, 2017

SanCap said:
Did you just insert the card into one of the card slots on the CS?

Yes. Go to the Explorer and install from sd. It will update the app and keep the data.

SanCap · Jul 3, 2017

cvanhoose said:
Yes. Go to the Explorer and install from sd. It will update the app and keep the data.

Thanks, it got rid of the limitations but now I am getting a strong interference warning. I will play with it some and see how it goes.

cvanhoose · Jul 3, 2017

By the way, if you ever need to go back to the other version, you can do a factory reset on the CS.

SanCap · Jul 3, 2017

cvanhoose said:
By the way, if you ever need to go back to the other version, you can do a factory reset on the CS.

What apps did you install?

SanCap · Jul 3, 2017

SanCap said:
Thanks, it got rid of the limitations but now I am getting a strong interference warning. I will play with it some and see how it goes.

My interference warnings have gone away. I think I caused them by leaving the sd card in the CS that had the app.adk on it.

cvanhoose · Jul 3, 2017

SanCap said:
What apps did you install?

ASDr, it is a frequency finder. I’ve had it for awhile now. It requires a usb antennae.

It’s not possible for the SD card to cause the interference.
Phones, Bluetooth watches, Bluetooth anything, Wi-Fi, all transmit in 2.4 and 5.8
I leave any device that transmits in these frequencies away from the controller and turned off.

I am happy to say that I have about 5 flights with the Inspire 2 and 5 flights with a Mavic Pro with great connection and performance.

I do believe hope that DJI will update the CS soon with the correct file.

SanCap · Jul 3, 2017

cvanhoose said:
ASDr, it is a frequency finder. I’ve had it for awhile now. It requires a usb antennae.

It’s not possible for the SD card to cause the interference.
Phones, Bluetooth watches, Bluetooth anything, Wi-Fi, all transmit in 2.4 and 5.8
I leave any device that transmits in these frequencies away from the controller and turned off.

I am happy to say that I have about 5 flights with the Inspire 2 and 5 flights with a Mavic Pro with great connection and performance.

I do believe hope that DJI will update the CS soon with the correct file.

I found everything does function properly within the app except the Editor, which I do not use.

Did you notice that the on/off switch for Geo fencing is gone?

Advexure · Jul 4, 2017

@cvanhoose, this is a great find. We had a few reports of this issue over the last 24-48 hours. Great information and awesome find. You have a Happy 4th sir!

CrystalSky not compatible - latest Inspire 2 firmware

Similar threads

Privacy & Transparency

Privacy & Transparency