- Joined
- Aug 7, 2013
- Messages
- 10,825
- Reaction score
- 5,701
Hi Pete,Hi Editor.
I cant see any post here about the problem of the dynamic home point not able to be set to the Rc .
I have done many test today away from any interference...buildings...cell phones etc etc.
1....The home point is set when the Inspire is started...then the home point wanders all around the place...quite some distance from the model.
2....If I move the Inspire to another point say 20 meters away....rest the home point on the Android app ...to the model....it seems to be more accurate.
You need to look carefully at the map screen in the app to see this happen....not just go fly......your home point could be 50 meters away.
3...try now to set the home point to the rc/pilot on the app.....repeated "poor signal errors....nothing around me...removed the tablet off the cradle so the tab is not blocking the gps on the rc transmitter ...still poor signal.
I run all the current updated firmware...installed without any problems...bird...batt's...rc....and Samsung Tab S.
Tech support said move to another location....???? how many times???? it still reports poor signal.
I have refused to put this bird in the air again until it is safe to fly and return to home successfully.
I am open to being told .....I am wrong...if I am actually wrong.
Ed.....I would appreciate your comments.
Already on the list - see my post 7 posts up with bullet points

Blade Strike is already on the case.
Thanks.