Welcome Inspire Pilots!
Jump in and join our free DJI Inspire community today!
Sign up

I1’s and x3’s

Status
Not open for further replies.
Joined
Jun 28, 2018
Messages
35
Likes
3
Age
45
#1
Allo,
We have 1, (maybe) 2 extra airframes ONLY,,,,, from a project in development.

Inspire airframe - 600.00 usd + shipping/pp
(Question asked which version it is 1v1, with whichever props & prop holders you want v1, 2 or 3, and the X5 "riser" feet) (we may have other things later and will update accordingly)

Everything is in perfect working order and has minimal use as we were only attempting autonomous- multi bird flying and shooting at one time, so most of the time was spent on the keyboard : )
The airframes have the firmware that is available on the dee jay high’s website installed.
The aircraft all have the X5? risor ‘feet’, x3 gimbal mount, as well as whiichever props and prop locks you want. (1/2/3)

Airframes are tested (have maybe a couple of autonomous runs on them)

I’ve been parsing the want ads and as amazing a mod as ‘the editor’ is, it still is the ‘internet’ so, making sure the forum stays good with proper respects to a ‘good dude’.

I’m in the USA, San Jose Ca, 95136, if anyone just wants to stop by for a beer upon pickup, we usually have whiskey as well : )

Currency is USD, buyer pays paypal and shipping, (or any other payment method charges)

We are on the search for 3 more x5’s, so would take that into consideration if relevant.

Cheers,
-W-
 

Attachments

Last edited:
Joined
Jun 28, 2018
Messages
35
Likes
3
Age
45
#4
1) X3 to droneted, sent two day USPS express shipping from Ca to Ny, pics and tracking information PM’d.
Ad updated.
(Attempted to upload video, but only embed?)
 
Joined
Dec 14, 2017
Messages
110
Likes
35
Age
54
#5
Allo,
We have 3, possibly 4 extra airframes ONLY,,,, and 2 extra x3’s, from a project in development.

Inspire airframe - 600.00 usd + shipping/pp
(Question asked - yes, 2 of them are 1v2, 1 is fully 1v2 minus the sticker, 1 is 1v1)
X3’s - 300.00 usd, shipped conus.

Everything is in perfect working order and has minimal use as we were only attempting autonomous- multi bird flying and shooting at one time, so most of the time was spent on the keyboard : )
The airframes have the firmware that is available on the dee jay high’s website on them and the x3’s work as they should.
The aircraft all have the risor ‘feet’ and half of them have the x3 gimbal mount, the other half have the x5 mount, we don’t use either - we have our own so first come first serve it’s your choice.

For airframes I’ll bind a controller and send you a vid of it working, you can have whatever prop set you like 1/2/3, (I personally like the first set) we have plenty of each.

For x3’s ill send a video of it, on a bird - initializing and the camera feed, so you know it’s good.

I’ve been parsing the want ads and as amazing a mod as ‘the editor’ is, it still is the ‘internet’ so, making sure the forum stays good with proper respects to a ‘good dude’.

I’m in the USA, San Jose Ca, 95136, if anyone just wants to stop by for a beer upon pickup, we usually have whiskey as well : )

Currency is USD, buyer pays paypal and shipping, (or any other payment method charges)

We are on the search for 3 more x5’s, so would take that into consideration if relevant.

Cheers,
-W-
so 900 for bird with x3 ??
 
Joined
Nov 21, 2015
Messages
56
Likes
3
Age
74
Location
Laguna Woods, California
#10
Allo,
We have 3, possibly 4 extra airframes ONLY,,,, and 2 extra x3’s, from a project in development.

Inspire airframe - 600.00 usd + shipping/pp
(Question asked - yes, 2 of them are 1v2, 1 is fully 1v2 minus the sticker, 1 is 1v1)
X3’s - 300.00 usd, shipped conus.

Everything is in perfect working order and has minimal use as we were only attempting autonomous- multi bird flying and shooting at one time, so most of the time was spent on the keyboard : )
The airframes have the firmware that is available on the dee jay high’s website on them and the x3’s work as they should.
The aircraft all have the risor ‘feet’ and half of them have the x3 gimbal mount, the other half have the x5 mount, we don’t use either - we have our own so first come first serve it’s your choice.

For airframes I’ll bind a controller and send you a vid of it working, you can have whatever prop set you like 1/2/3, (I personally like the first set) we have plenty of each.

For x3’s ill send a video of it, on a bird - initializing and the camera feed, so you know it’s good.

I’ve been parsing the want ads and as amazing a mod as ‘the editor’ is, it still is the ‘internet’ so, making sure the forum stays good with proper respects to a ‘good dude’.

I’m in the USA, San Jose Ca, 95136, if anyone just wants to stop by for a beer upon pickup, we usually have whiskey as well : )

Currency is USD, buyer pays paypal and shipping, (or any other payment method charges)

We are on the search for 3 more x5’s, so would take that into consideration if relevant.

Cheers,
-W-
Hello Aloha, I am developing an idea too and am looking for just I2 airframes (no camera but do need the gimbal mount) that can support the X5 camera system. For my project, the motors do not need to be working, but do need connectivity via the controller. Do you have anything in this range?
 
Joined
Mar 14, 2013
Messages
159
Likes
24
#11
Allo,
We have 3, possibly 4 extra airframes ONLY,,,, and 2 extra x3’s, from a project in development.

Inspire airframe - 600.00 usd + shipping/pp
(Question asked - yes, 2 of them are 1v2, 1 is fully 1v2 minus the sticker, 1 is 1v1)
X3’s - 300.00 usd, shipped conus.

Everything is in perfect working order and has minimal use as we were only attempting autonomous- multi bird flying and shooting at one time, so most of the time was spent on the keyboard : )
The airframes have the firmware that is available on the dee jay high’s website on them and the x3’s work as they should.
The aircraft all have the risor ‘feet’ and half of them have the x3 gimbal mount, the other half have the x5 mount, we don’t use either - we have our own so first come first serve it’s your choice.

For airframes I’ll bind a controller and send you a vid of it working, you can have whatever prop set you like 1/2/3, (I personally like the first set) we have plenty of each.

For x3’s ill send a video of it, on a bird - initializing and the camera feed, so you know it’s good.

I’ve been parsing the want ads and as amazing a mod as ‘the editor’ is, it still is the ‘internet’ so, making sure the forum stays good with proper respects to a ‘good dude’.

I’m in the USA, San Jose Ca, 95136, if anyone just wants to stop by for a beer upon pickup, we usually have whiskey as well : )

Currency is USD, buyer pays paypal and shipping, (or any other payment method charges)

We are on the search for 3 more x5’s, so would take that into consideration if relevant.

Cheers,
-W-
Can I see pictures and video of the best I1V2 you have?
 
Joined
Jun 28, 2018
Messages
35
Likes
3
Age
45
#13
Hello Aloha, I am developing an idea too and am looking for just I2 airframes (no camera but do need the gimbal mount) that can support the X5 camera system. For my project, the motors do not need to be working, but do need connectivity via the controller. Do you have anything in this range?
I believe I have a ‘general’ idea? But send me a pm with your tele info, I’ll send you mine as well,, let’s chat for a minute, and if there’s anything I can assist you with to accomplish your goals, I’m completely down to help, otherwise I wouldn’t want to send you anything you don’t need, especially if you’re in concept or proof of concept mode (goodness knows we could have used the honesty when we were inquiring around)
-W-
 
Joined
Jun 28, 2018
Messages
35
Likes
3
Age
45
#14
Can I see pictures and video of the best I1V2 you have?
After Tuesday, yes I could send or update what you request. Video - I’ve attempted to upload per what I stated initially, files were too large so that is completely my bad in assuming I could do so without creating an outside account at another host - then a href’ing it here. Again, my error. Tuesday we have an inbound guest with the intentions of leaving with the V2’s. I’m being as transparent and honest as possible - as always. I would hope more would do the same.
Thanks.
 
Joined
Mar 14, 2013
Messages
159
Likes
24
#17
After Tuesday, yes I could send or update what you request. Video - I’ve attempted to upload per what I stated initially, files were too large so that is completely my bad in assuming I could do so without creating an outside account at another host - then a href’ing it here. Again, my error. Tuesday we have an inbound guest with the intentions of leaving with the V2’s. I’m being as transparent and honest as possible - as always. I would hope more would do the same.
Thanks.
Just following up.
 
Status
Not open for further replies.

New Threads

Forum statistics

Threads
18,076
Messages
180,512
Members
26,660
Latest member
cincofresh