- Joined
- Jan 19, 2017
- Messages
- 30
- Reaction score
- 11
New I2 came yesterday, controller was not linked to the drone and would not link out of the box. Had to do a firmware update on the I2 and then the controller to get GO4 it to even look for it. Finally after the updates it found it and paired. Installed some props on the system and man! rattled like my first old Ford car I bought for $50 when I was a teen. 3 of the 4 motors rattled like a baby rattle. All props had foam inserts.
I added more foam from a T47 battery box I had and that did stopped it rattling but the props still moved up and down a tad when touching the blades. So I added a thin strip of electrical tape to the prop stud and with the additional foam and they are now firm with no movement or rattles. But come on man! Really? a $3k system you have to do this to???? Also noticed the controller buzzes like I'm beside an electrical power plant.
This stuff I could see on a $100 toy but WTF DJI...
I added more foam from a T47 battery box I had and that did stopped it rattling but the props still moved up and down a tad when touching the blades. So I added a thin strip of electrical tape to the prop stud and with the additional foam and they are now firm with no movement or rattles. But come on man! Really? a $3k system you have to do this to???? Also noticed the controller buzzes like I'm beside an electrical power plant.
This stuff I could see on a $100 toy but WTF DJI...