I'm sorry but here it is again

C

captain jim

Joined
Oct 25, 2015
Messages
11
Reaction score
2
Age
74
I bought a Inspire Pro in early November, flew it a few times and put it away for the winter. I believe I did one FW update. Is it possible I updated my pro with regular inspire software? I need direction on updating the aircraft FW. current version is 1.4.00.10+. I'm getting that number from the RC. Now, since this is a pro what do I use for my updates. Inspire downloads have two updates available, 1.6.0.40 12/22/2015 and 1.7.0.90 03/17/2016 Inspire Pro/raw has update 1.3.0.60 12/22/2015 and 1.4.0.70 03/07/2016. I apologize for this....

Jim
 
If you have the Pro you will need the Inspire Pro firmware version 1.4.0.70 from the Inspire Pro downloads page. This should be all you need to do and should correct your firmware issue . When finished this should be your final versions!!! I hope this helps you.
 
Reactions: The Editor
thanks Ralph, I downloaded it, everything went well three beeps and everything in the green...

Now,i need to order those props...
 
FlyHighUSA said:
are you needing the 1345 t props
If you want I can invoice you through paypal if you want to get it done and on the way.
Click to expand...
I have a good set but need a spare set. Put them on your site and I'll order them from there.
 
You must log in or register to reply here.

Similar threads

B
One motor is slower... How can I determine if it is a 3510H or 3510?
Replies
8
Views
2K
Inspire 1 Help
Brian Fist
B
K
Inspire 1 repair story.
Replies
5
Views
4K
Inspire 1 Discussion
kevbac
K
B
Deep dive into Inspire 1 Firmwares... Trying to debunk the funk...
Replies
30
Views
8K
Inspire 1 Discussion
Jimmy6616
B
  • Locked
Tripltek Pro Daylight Readable Tablet *** SOLD ***
Replies
4
Views
4K
Classifieds
Brian Fist
B
V
Inspire in landing position but indicates it is in still in still in travel mode
Replies
3
Views
1K
Inspire 1 Help
Vocc77
V
Menu
Log in
Register