I bought a used Inspire 1 that has no marking whatsoever on the motors/ shaft/ or adapter, it probably has worn off. I need to know the orientation of the motors, Anyone have a diagram or photo that shows this?
I bought a used Inspire 1 that has no marking whatsoever on the motors/ shaft/ or adapter, it probably has worn off. I need to know the orientation of the motors, Anyone have a diagram or photo that shows this?
Apologies for a super-dumb question but I need to know and don't have the craft to hand - the left rear motor (looking at the nose of the Inspire)...does it spin CW or CCW? I have s feeling it's CW but would appreciate the confirmation I tried Googling but couldn't find anything other than...
inspirepilots.com
Here’s a link that has a very good video from our forum here.
You're being obtuse on purpose. The moderator's answer - which includes a video for the love of god - is literally idiot-proof....okay...idiot-resistant, apparently.
Show some initiative and exercise some diligence. Even if the prop mounts are missing (which you haven't stated they are), there are 6 ways from Sunday to extrapolate motor rotation. If the prop mounts ARE there, simply mount the props. The motors will rotate in the direction that provides thrust.
So starting the motors and idling the four of them (without props attached) doesn't tell you which way they rotate then?
And the motor id M1-M4 is staring you in the face through the entire video as a graphic overlay (apart for the last 9 seconds!).