Inspire 2 gimbal control

[Stratospheric]

Hi all

I am physically disabled and can only use a tablet with a mouse. My mate and I are looking at getting an I2 but we were wondering if the gimbal could still be controlled by moving your finger/pointer around the tablets screen as I believe you could with the I1. We are wanting to be a dual operator set up with me doing the camera work.

Thanks

 

[Advexure]

Yes, the gimbal can still be controlled by moving your finger/pointer around on the tablet's screen.

 

[Stratospheric]

Awesome thanks

 

[Eric in Pa.]

From what I can see, you can only move the cameras vertical movement with the blue dot on the screen and not horizontally. I could be wrong, for I am a newbie


Sent from my iPhone using InspirePilots

 

[Ftolino]

Blue dot will go every direction. Should work for you.

 

[NickU]

If it only goes up/down, then switch from follow to free mode, that unlocks the gimbal yaw.

When in free mode, you can pan/tilt the camera by dragging your finger on screen, certainly on a single operator setup. I'd presume you can do the same with a dual op setup too.

 

[Eric in Pa.]

Thank you so much. I'm very dissatisfied with the lack of instructions or tutorials available for the inspire 2. You're pretty much on your own.


Sent from my iPhone using InspirePilots

 

[Ftolino]

Eric where you located in PA roughly

 

[Eric in Pa.]

I am in Williamsport Pa.


Sent from my iPhone using InspirePilots

 

[Ftolino]

I am in Williamsport Pa.


Sent from my iPhone using InspirePilots

I was just up there picking up my Mavic . I'm above Easton pa

 

[Eric in Pa.]

I was just up there picking up my Mavic . I'm above Easton pa

Where did you get the mavic?



Sent from my iPad using InspirePilots

 

[Ftolino]

Some guy from Craigslist