Propeller Case - Anyone make or Print one?

RolandRSA · Jul 13, 2015

There has been a case of one igniting. Lipo batteries are volatile at the best of times so it is not worth taking more risks keeping them connected to the drone then absolutely necessary.

Clampit · Jul 13, 2015

Oh well you learn something new every day, I always travel with my batteries in my phantom, better stop that & also with my I1

Thanks for the advice

RolandRSA · Jul 13, 2015

No problem. I also travelled with one in my Phantom till i learned about the Inspire incident. Glad i could help, happy flying!

Solid · Jul 13, 2015

RolandRSA said:
Solid, nice upgrades. Just a word of advice, i would suggest you don't travel with a battery in the Inspire. Looks good though.

thats a really good suggestion because I actually forget all the time!
I dont travel with it all that much but there is space on the case to put the battery in so there isnt really any excuse, need to start remembering that, in fact, will take it out of there right now so i dont forget !

Clampit · Jul 15, 2015

Yep mine are also out & now housed in the inspire case

Right just to let you guys know I've just ordered a Clear tube for my props
I've tried everything to protect them but all the tubes are to small this one is 2.5inches by 18inches but I'll be able to cut it down it comes with two end caps & fingers crossed it'll fit into the stock case. I'll let you all know if it's a success.

gray52 · Jul 15, 2015

Any links?

Clampit · Jul 15, 2015

gray52 said:
Any links?

Here you go,
http://www.visipak.co.uk/
They're gonna send me out a free sample to try. It's going to take about a week cos it's coming from the states

gray52 · Jul 15, 2015

Thanks for that. They are in the u.k. will give them a ring tomorrow. Will make my own ends with a dji log in them.

Clampit · Jul 16, 2015

gray52 said:
Thanks for that. They are in the u.k. will give them a ring tomorrow. Will make my own ends with a dji log in them.

Let me know how you get on buddy

Clampit · Aug 3, 2015

gray52 said:
Thanks for that. They are in the u.k. will give them a ring tomorrow. Will make my own ends with a dji log in them.

Hi gray52,

Have you had any luck with the link I posted regarding the prop tube?
I've still not received mine yet gonna give them another call tomorrow.

jackdakota · Aug 4, 2015

No need to wait that long if you just get it from Amazon.
http://www.amazon.com/gp/aw/d/B00FBC54VW

I've been using mine for 4 months. Can't beat $8 and fits in the tradscraft case perfectly.

skylabimaging · Aug 5, 2015

jackdakota said:
No need to wait that long if you just get it from Amazon.
http://www.amazon.com/gp/aw/d/B00FBC54VW

I've been using mine for 4 months. Can't beat $8 and fits in the tradscraft case perfectly.

View attachment 3062 View attachment 3063 View attachment 3064 View attachment 3065

Sweet...placed an order for a few

Hercules_One · Aug 5, 2015

Cole Slaw said:
Hey folks searched around on google and the forums but couldn't find anything. I use the standard DJI case and used to carry around all my propellers. However I think they got a little warped and now I get a little jello effect in my camera. Regardless I am looking for a case to hold one set of the propellers that would fit in the slot they already sit in. Anyone make/sell something like this?

Hi, I'm sorry, I can't quite understand how the little warped propellers get you jello effect in your camera, can you please explain me a little?

EDIT: ohh maybe is some of the vibration?

skylabimaging · Aug 5, 2015

Hercules_One said:
Hi, I'm sorry, I can't quite understand how the little warped propellers get you jello effect in your camera, can you please explain me a little?

EDIT: ohh maybe is some of the vibration?

Yep, when a prop is warped, it's unbalanced. This cause those vibrations.

Clampit · Aug 8, 2015

jackdakota said:
No need to wait that long if you just get it from Amazon.
http://www.amazon.com/gp/aw/d/B00FBC54VW

I've been using mine for 4 months. Can't beat $8 and fits in the tradscraft case perfectly.

View attachment 3062 View attachment 3063 View attachment 3064 View attachment 3065

Update on my tubes

Gave the supplier a call & was told that they have been dispatched to me, should get them next Monday 10/08/15. Well these are samples so have not cost me anything

I just hope they fit in the original DJI inspire case, I'll let you guys know how they are & post some pics.

gray52 · Aug 11, 2015

If they are like mine they won't be any good, to short.

Clampit · Aug 11, 2015

gray52 said:
If they are like mine they won't be any good, to short.

Yep same here 12inch tubes... I did ask for 18 inch but only got 12.

All props fit in & it does fit into the standard case, I phoned them again & stated I wanted 18 inch so I'll have to wait & see what happens.

gray52 · Aug 11, 2015

Yeah , I don't think you will get them that size. Mine only fitted 4 props, good idea but expensive to buy 1 in the bigger size.

Jwffvm · Sep 21, 2016

jackdakota said:
http://www.amazon.com/gp/aw/d/B00FBC54VW

I use this. Only $7. Tube is 15in x 2in 4 props fit and the tube fits nicely in the original case where the props used to be.

This is what we came up with. Need to cut it a little long since one of the props won't sit equally with the other 3, but it $4.95 Office Depot.

alex sample · Feb 7, 2017

Jwffvm said:
This is what we came up with. Need to cut it a little long since one of the props won't sit equally with the other 3, but it $4.95 Office Depot.

and this fits inside the case in the designated propeller spot?

Propeller Case - Anyone make or Print one?

RolandRSA

Clampit

RolandRSA

Solid

Clampit

gray52

Clampit

gray52

Clampit

Clampit

jackdakota

skylabimaging

Hercules_One

skylabimaging

Clampit

gray52

Clampit

gray52

Jwffvm

Attachments

alex sample

Similar threads

Propeller Case - Anyone make or Print one?

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency