trouble getting my inspire 1 to respond.. When I turn it on I get the normal flashing lights then a solid blue light. Cant get it to do anything after that. Any suggestions?
Solid blue status light
- Thread starter NH Phantom
- Start date
- Joined
- Jul 29, 2015
- Messages
- 216
- Reaction score
- 65
- Age
- 46
- Joined
- Jul 29, 2015
- Messages
- 216
- Reaction score
- 65
- Age
- 46
Solid blue also can happen if there is no connection between the bird and the RC. Have you updated any firmware lately? Sometimes when you upgrade the firmware on the RC and not on the Inspire it won't connect. Make sure you have the latest firmware on both.
yes travel mode. cant get it out of travel mode. is there another way to get it out? I'm just flipping the switch on the controller
- Joined
- Jul 29, 2015
- Messages
- 216
- Reaction score
- 65
- Age
- 46
If you can't exit travel mode you most likely have a connection issue. Have you updated the firmware on the RC but not the Inspire or vice versa? Make sure both are up-to-date.
- Joined
- Jul 29, 2015
- Messages
- 216
- Reaction score
- 65
- Age
- 46
Thats exactly whats wrong then. Reformat your SD card (after emptying it of course) put the BIN file back on and try again.
downgraded remote to 1.5.80 drone to 1.4.00.10 app 2.8.6 it will now go into landing mode and start. But will shut down with only the left stick down camera still does not respond at all
what update versions should I do and in what order? giveng me a no image transmission signal message.
what update versions should I do and in what order? giveng me a no image transmission signal message.
- Joined
- Jul 29, 2015
- Messages
- 216
- Reaction score
- 65
- Age
- 46
Upgrade the bird first (v1.9.1.30) then the RC to the latest firmware using the DJI GO app..
- Joined
- Jul 29, 2015
- Messages
- 216
- Reaction score
- 65
- Age
- 46
Similar threads
New Posts
-
DJI Inspire: Impact on Drone Cinematography and Commercial Use
- Latest: Astinmartin
-
-
-
-
Members online
No members online now.