Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

TB50 12 pins connector: model number?

I received the Inspire2 remote chargher cable, i tried to use it with inverting the direction, so: to the RC power port i connected 25V, but the battery it doesn't charge it...if i use with normal direction/condition, i get 25v from the RC power socket
Yep, that's the way it works ... I had a success powering Inspire 2 camera with 6S standard LiPo battery, bypassing the socket and telemetry circuit, but without getting inside of Ronin you'll need this battery connector anyway...
 
Yep, that's the way it works ... I had a success powering Inspire 2 camera with 6S standard LiPo battery, bypassing the socket and telemetry circuit, but without getting inside of Ronin you'll need this battery connector anyway...
So the only way to power it is to open it adding 2 wires bypassing the main circuit
 
So the only way to power it is to open it adding 2 wires bypassing the main circuit
Probably, but I don't know for sure ... Perhaps using this female socket from TB50 battery will allow to deliver power from LiPo directly without surgery inside, but the system will issue some warnings having no telemetry data from smart circuitry.
 
Probably, but I don't know for sure ... Perhaps using this female socket from TB50 battery will allow to deliver power from LiPo directly without surgery inside, but the system will issue some warnings having no telemetry data from smart circuitry.
i don't have telemetry on the R2 but just the voltage..anyway, i think is not enough to connect a female socket with voltage.
 
Last edited by a moderator:
  • Like
Reactions: kronja

New Posts

Members online

Forum statistics

Threads
22,295
Messages
210,743
Members
34,534
Latest member
Udaipurescort66