who's next?... Firmware V01.0.330 released

NickU · Apr 13, 2017

Not a lot new, but some bits that will make a few folks happy

What's New?

Date: 2017.04.13
Aircraft Firmware: V01.0.0330
Remote Controller Firmware: V01.0.0110
DJI Go App: iOS V 4.0.7, Android V 4.0.6

 Optimized No-Fly Zone Return to Home and unlocking.
 Reduced high-frequency vibration after gimbal self-checking.
 Added an option to control gimbal pan by holding the C1 button and rotating the control dial in Follow
Mode.
 When exiting an Intelligent Flight Mode, the gimbal will no longer center itself.

https://dl.djicdn.com/downloads/inspire_2/20170413/Inspire_2_Release_Notes_EN_20170413.pdf

Anyone volunteering to be a guinea pig?

(ps, can't find anywhere that says you can't downgrade/revert back to .240 )

Sligeach · Apr 13, 2017

I'm gonna go for it!

NickU · Apr 13, 2017

Brave man

Raphael Dahan · Apr 13, 2017

Nothing with the real previous FW problems, unless there are some hidden solutions

NickU · Apr 13, 2017

They've probably been too busy taking out features prepping for the Phantom 4 Advanced release

Sligeach · Apr 13, 2017

Wonder will it sort out Autopilot or litchi?

deltalimatango · Apr 13, 2017

Anyone here going to use the Assistant mode verses the DJI GO App?

Sligeach · Apr 13, 2017

Just updated using the Assistant. All went ok, and it seems to give you the option to downgrade. Just have to test fly now.

deltalimatango · Apr 13, 2017

Sligeach said:
Just updated using the Assistant. All went ok, and it seems to give you the option to downgrade. Just have to test fly now.

Cool. I wish there was a way to disable the beeps during the upgrade.

Sligeach · Apr 13, 2017

Test flight went well, although it just started raining here in Ireland, so I'll have to wait 'till later to do a more extensive flight test. Didn't fix the 'red prop' issue though. Lol.

deltalimatango · Apr 13, 2017

Sligeach said:
Test flight went well, although it just started raining here in Ireland, so I'll have to wait 'till later to do a more extensive flight test. Didn't fix the 'red prop' issue though. Lol.

Red prop?

SanCap · Apr 13, 2017

I will be testing it today.

Sligeach · Apr 13, 2017

deltalimatango said:
Red prop?

Yeah, you will see this issue on other threads. (I was joking about the firmware fixing this issue[emoji23])

deltalimatango · Apr 13, 2017

I thought so. I was a bit slow today. [emoji4]

NickU · Apr 13, 2017

The firmware release notes have fixed my red prop rattle issue

.... I printed them out, cut a bit out and stuffed it under the props. They don't rattle any more

Viper Pilot · Apr 13, 2017

I plan to install the latest FW today. Why not...........what could possibly go wrong??? LOL

Hmmmm, wonder if they reduced the speed again. Can't tell anything by reading the release notes just like the last time!!

Sligeach · Apr 13, 2017

My top speed this morning was 99.5Kph. I did have a tailwind though.

NickU · Apr 13, 2017

One of the speed issues from the .240 firmware seemed to be that you could consistently go faster in ATTI than in sport, & that seemed to be at the root of the speed reduction problem. So if you want to see if it's back to pre .240 behaviour, see how fast you can get to in sport up n downwind, then try it again in ATTI and see if you get slower or faster speeds that way.

Mookster · Apr 13, 2017

Meh, Air Encoder Error (0x100000) now

NickU · Apr 13, 2017

Did you do the update with the camera attached? If you didn't, then put the camera on and do the update again.

who's next?... Firmware V01.0.330 released

Similar threads

Privacy & Transparency

Privacy & Transparency