3D printed accessories

Ascender · Feb 23, 2015

Apologies if such a thread exists, but I couldn't find such a dedicated discussion in my searches.

Does anyone have any 3D printer files or links to creations for the Inspire 1 to share?

I'm hoping that Bjorn can create one for my RF-V16 GPS tracker. Is the side of the landing gear the safest place to mount such a tracker (in terms of magnetic/compass interference)?

I purchased an Inspire 1 lens cap from: http://www.ebay.com/itm/221683341887?redirect=mobile

and an ND lens case from:
http://www.ebay.com/itm/251813862256?redirect=mobile

turbodronepilot · Feb 23, 2015

Ascender said:
Apologies if such a thread exists, but I couldn't find such a dedicated discussion in my searches.

Does anyone have any 3D printer files or links to creations for the Inspire 1 to share?

I'm hoping that Bjorn can create one for my RF-V16 GPS tracker. Is the side of the landing gear the safest place to mount such a tracker (in terms of magnetic/compass interference)?

I purchased an Inspire 1 lens cap from: http://www.ebay.com/itm/221683341887?redirect=mobile

and an ND lens case from:
http://www.ebay.com/itm/251813862256?redirect=mobile

Hey Ascender ..probably the best place to mount the tracker would be behind the battery ( if someone made a mount that spaced it out away from the battery to avoid magnetic interference between the battery on the inspire and the battery in the rf-v16 )
Another place would be near the center of gravity on a arm near the cockpit. . Something that would mount around the arm with a flat spot to mount the tracker on..
or velcro it on the arm like in my pictures I posted. .
I went over a mile with mine on with no signal problems..
Check out shapeways on line ..they have a bunch of 3d printed stuff..tdp..

blade strike · Feb 23, 2015

If you want provide me with some measurements and some pictures and I will see what I can do.

turbodronepilot · Feb 23, 2015

blade strike said:
If you want provide me with some measurements and some pictures and I will see what I can do.

Blade .if you want I'll send u a rf-v16 tracker to use for a mock up..
if so let me know and I'll text u on rcgoups.com to get your mailing address. .tdp..

blade strike · Feb 23, 2015

turbodronepilot said:
Blade .if you want I'll send u a rf-v16 tracker to use for a mock up..
if so let me know and I'll text u on rcgoups.com to get your mailing address. .tdp..

Sounds good.. That would be best, so I could do some test fittings and see what works out the best.

Ascender · Feb 23, 2015

blade strike said:
If you want provide me with some measurements and some pictures and I will see what I can do.

I haven't verified these dimensions from an earlier post:
the rf-v16 tracker measurements are 41mm L ×36mm W ×17mm H

Ascender · Feb 23, 2015

Ascender said:
I haven't verified these dimensions from an earlier post:
the rf-v16 tracker measurements are 41mm L ×36mm W ×17mm H

Ah, just found the user manual for the RF-V16. It lists:

40 x 34 x 14mm
Weight 27g

turbodronepilot · Feb 23, 2015

Ascender said:
Ah, just found the user manual for the RF-V16. It lists:

40 x 34 x 14mm
Weight 27g

Ascender. .I've sent blade a pm and when he responds I will ship one of my rf-v16 along with a tk102..
thanks blade !!

turbodronepilot · Feb 23, 2015

turbodronepilot said:
Ascender. .I've sent blade a pm and when he responds I will ship one of my rf-v16 along with a tk102..
thanks blade !!

Hey Ascender. .I sent the trackers to blade ..he will have them Wednesday. .I'll work on some ruff ideas for mounts and post them before Wednesday. .
this is going to be great. .
turbo. .

Ascender · Feb 23, 2015

turbodronepilot said:
Hey Ascender. .I sent the trackers to blade ..he will have them Wednesday. .I'll work on some ruff ideas for mounts and post them before Wednesday. .
this is going to be great. .
turbo. .

You two rock!

blade strike · Feb 23, 2015

Hey turbo is the one offering his equipment. I just find this type of stuff fun..

turbodronepilot · Feb 24, 2015

blade strike said:
Hey turbo is the one offering his equipment. I just find this type of stuff fun..

Hey blade. .here's my ideas for the trackers ..
I sure whatever you make will be cool..
Here's my rough oakie drawing. .

blade strike · Feb 24, 2015

Ok, I will see what I can do.

blade strike · Feb 26, 2015

Ok received the rf16 Yesterday, I should be able to start working on something this weekend.

blade strike · Mar 1, 2015

made a universal boom clamp type mount. clamps to boom and then use industrial grade double side tape.

I'm going to use this for my new trackimo that should arrive this week.

Ascender · Mar 1, 2015

blade strike said:
made a universal boom clamp type mount. clamps to boom and then use industrial grade double side tape.

I'm going to use this for my new trackimo that should arrive this week.

View attachment 650 View attachment 651 View attachment 652

Awesome blade! Do you have a file that you can share?

Ascender · Mar 1, 2015

blade strike said:
made a universal boom clamp type mount. clamps to boom and then use industrial grade double side tape.

I'm going to use this for my new trackimo that should arrive this week.

View attachment 650 View attachment 651 View attachment 652

That's a sharp design, blade.

blade strike · Mar 1, 2015

Ascender said:
That's a sharp design, blade.

I can make you one for a small fee

turbodronepilot · Mar 1, 2015

Impressive Blade. .nice job!!

blade strike · Mar 1, 2015

Here is the one I made directly for the rf-v16.

3D printed accessories

Similar threads

Privacy & Transparency

Privacy & Transparency