Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

3D printed accessories

Joined
Feb 13, 2015
Messages
146
Reaction score
41
Age
46
Location
Tampa, FL
Apologies if such a thread exists, but I couldn't find such a dedicated discussion in my searches.

Does anyone have any 3D printer files or links to creations for the Inspire 1 to share?

I'm hoping that Bjorn can create one for my RF-V16 GPS tracker. Is the side of the landing gear the safest place to mount such a tracker (in terms of magnetic/compass interference)?

I purchased an Inspire 1 lens cap from: http://www.ebay.com/itm/221683341887?redirect=mobile

and an ND lens case from:
http://www.ebay.com/itm/251813862256?redirect=mobile
 
Apologies if such a thread exists, but I couldn't find such a dedicated discussion in my searches.

Does anyone have any 3D printer files or links to creations for the Inspire 1 to share?

I'm hoping that Bjorn can create one for my RF-V16 GPS tracker. Is the side of the landing gear the safest place to mount such a tracker (in terms of magnetic/compass interference)?

I purchased an Inspire 1 lens cap from: http://www.ebay.com/itm/221683341887?redirect=mobile

and an ND lens case from:
http://www.ebay.com/itm/251813862256?redirect=mobile
Hey Ascender ..probably the best place to mount the tracker would be behind the battery ( if someone made a mount that spaced it out away from the battery to avoid magnetic interference between the battery on the inspire and the battery in the rf-v16 )
Another place would be near the center of gravity on a arm near the cockpit. . Something that would mount around the arm with a flat spot to mount the tracker on..
or velcro it on the arm like in my pictures I posted. .
I went over a mile with mine on with no signal problems..
Check out shapeways on line ..they have a bunch of 3d printed stuff..tdp..
 
  • Like
Reactions: Ascender

Members online

No members online now.

Forum statistics

Threads
22,277
Messages
210,655
Members
34,326
Latest member
BobbyeriGop