Binding Inspire 1 controller to drone

[gunner369]

I was following the instructions from DJI video, I turned on controller and drone and proceeded to start to bind when the controller beeped, I went to drone pushed red button, as I started to push it the controller beep quit so as I pushed the red button on drone it beeped and now I can't stop it from beeping, everytime I power up drone it starts beeping and I can't get it to stop and it won't bind to controller or the beeping just continues. what did I do wrong , how can I get drone to stop beeping. Thanks in advance, Dave HELP

 

[The Editor]

Moved to correct section

 

[The Editor]

I was following the instructions from DJI video, I turned on controller and drone and proceeded to start to bind when the controller beeped, I went to drone pushed red button, as I started to push it the controller beep quit so as I pushed the red button on drone it beeped and now I can't stop it from beeping, everytime I power up drone it starts beeping and I can't get it to stop and it won't bind to controller or the beeping just continues. what did I do wrong , how can I get drone to stop beeping. Thanks in advance, Dave HELP

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[gunner369]

Thanks , but I followed the video, what I was trying to say was that I push the red button after the cpontroller had stopped beeping and when I did this the drone started beeping and now it won't stop, what did I do wrong Sir

 

[The Editor]

Thanks , but I followed the video, what I was trying to say was that I push the red button after the cpontroller had stopped beeping and when I did this the drone started beeping and now it won't stop, what did I do wrong Sir

Have you made sure the app setting is set to Master as in the video?

 

[gunner369]

I think I will do an IMU update and see if that fixes it. thanks

 

[gunner369]

OK. I finally got it fixed, thanks all for your help

 

[Donnie Frank]

Thanks , but I followed the video, what I was trying to say was that I push the red button after the cpontroller had stopped beeping and when I did this the drone started beeping and now it won't stop, what did I do wrong Sir

You have to push the drone button WHILE the RC is beeping.

D

 

[gunner369]

Thanks Donnie, that's how I got the beeping drone noise is pushing the red button after the rc stopped beeping.

 

[Donnie Frank]

Thanks Donnie, that's how I got the beeping drone noise is pushing the red button after the rc stopped beeping.

What happens when you push the red button BEFORE the RC stops beeping?

D

 

[gunner369]

well I finally after several tries got the rcconnected to I1and the beeping stopped.
Donnie I have a x3 that won't connect to video, but when I turn on I1 it goes thru it warm up thing, but it says video won't connect, do you have any idea what wrong with the camera, I have several camera's and they all work with this drone

 

[Donnie Frank]

well I finally after several tries got the rcconnected to I1and the beeping stopped.
Donnie I have a x3 that won't connect to video, but when I turn on I1 it goes thru it warm up thing, but it says video won't connect, do you have any idea what wrong with the camera, I have several camera's and they all work with this drone

Post the firmware numbers from the About page.

D

 

[gunner369]

app ver 3.1.60
a/c ver 1.11.01.50
rc ver 1.7.80
Donnie theres no camera version with the bad camera, when I put a good camera on a/c I seen a camera ver in the about page, so I guess there's a problem with the camera. Thanks, Dave

 

[Donnie Frank]

app ver 3.1.60
a/c ver 1.11.01.50
rc ver 1.7.80
Donnie theres no camera version with the bad camera, when I put a good camera on a/c I seen a camera ver in the about page, so I guess there's a problem with the camera. Thanks, Dave

Exactly. Looks like you found the problem.

D