Can't find the Gimbal Wheel Speed option after RC firmware update

Johnsimatos · Dec 30, 2016

Ajavalvur said:
View attachment 11398 So this setting is named different now? Cause "gimbal wheel speed" doesnt exist..

Gimbal settings, then advanced. Take a second to read what's been posted multiple times.

Sent from my iPhone using Tapatalk

Toan Doan · Dec 30, 2016

Here it is, its the gimbal pitch EXP change it to 5%

Sent from my iPhone using InspirePilots

Ajavalvur · Dec 30, 2016

My limits here are only from 80%, cannot change it to 5%.

SanCap · Dec 30, 2016

Ajavalvur said:
My limits here are only from 80%, cannot change it to 5%. View attachment 11400 View attachment 11401

Assuming you are on an iOS device. You are in the incorrect section, you need to go to the camera/gimbal menu then Advanced settings then adjust the gimbal parameters.

Toan Doan · Dec 30, 2016

Ajavalvur said:
My limits here are only from 80%, cannot change it to 5%. View attachment 11400 View attachment 11401

Oh man, you are in a wrong menu option. It's not under the top option, it's under camera - the one with the camera pic. Scroll down and you'll see that option just right below the battery menu.

Sent from my iPhone using InspirePilots

Johnsimatos · Dec 30, 2016

Maybe this will help

Sent from my iPhone using Tapatalk

Ajavalvur · Dec 30, 2016

hah, sorry guys for making a mess but now I finally found it. Cheers!

Simon Mallin · Dec 31, 2016

Toan Doan said:
After the recent RC firmware update ver.1.7.60, I've noticed that my gimbal wheel speed has been reset and it is way too fast. It was 35/100

But I can't seem to find that option anymore in the Dji Go App. It should be the first option in the RC menu>RC settings..just right above RC Calibration

Where has it gone? Please help.

Thanks

Sent from my iPhone using InspirePilots

DJI have really messed up here (again) with the GO update.

With a dual controller setup the EXP setting has much more effect on the slave controls for pitch and yaw compared to the single controller thumbwheel, it's like the old gimbal speed setting. So if the gimbal EXP is set at something close to zero to be usable with the thumbwheel then on the slave controls it hardly moves at all. Before the update the motion speed used to be the same whether using a single RC or dual RC setup.

Strictly speaking an EXP setting should be to change the input / output curve as it is for the RC flight stick controls, not the overall gimbal speed. DJI will you please sort this out.

steve Reed · Feb 20, 2017

Check out

Toan Doan · Feb 22, 2017

Simon Mallin said:
DJI have really messed up here (again) with the GO update.

With a dual controller setup the EXP setting has much more effect on the slave controls for pitch and yaw compared to the single controller thumbwheel, it's like the old gimbal speed setting. So if the gimbal EXP is set at something close to zero to be usable with the thumbwheel then on the slave controls it hardly moves at all. Before the update the motion speed used to be the same whether using a single RC or dual RC setup.

Strictly speaking an EXP setting should be to change the input / output curve as it is for the RC flight stick controls, not the overall gimbal speed. DJI will you please sort this out.

Yes, agree. They messed it up. But try to explain that to Dji is like talking to a brick wall. They only said they would talk to the RND team to find an answer. Still no answer other than playing with EXP settings or downgrade...I give up.

Sent from my iPhone using InspirePilots

Can't find the Gimbal Wheel Speed option after RC firmware update

Similar threads

Privacy & Transparency

Privacy & Transparency