Controller only flying Inspire 1

[Suncat33770]

Good Morning,

I am going to ask separate questions incase someone else need a solution. Inspire 1 CE1313 t600

Controler is CE1313 GL658A

• Should I be able to fly my drone with just the controller? No Iphone attached?
• Should it fly with a broken HDMI module

Thx

Randy

Largo FL

 

[IronSky1]

You need a host to install the DJI app on. (Android or Apple) HDMI will not effect use. Easy to remove if broke

 

[Donnie Frank]

Good Morning,

I am going to ask separate questions incase someone else need a solution. Inspire 1 CE1313 t600

Controler is CE1313 GL658A

• Should I be able to fly my drone with just the controller? No Iphone attached?

Yes.

• Should it fly with a broken HDMI module

I have not tested this, but you CAN fly without an HDMI device attached. So I assume that a broken HDMI module won't make any difference in flight characteristics.

D

 

[IronSky1]

Interesting you do not need the app to fly good to know.

 

[Donnie Frank]

Interesting you do not need the app to fly good to know.

You do not. Furthermore, you don't need the app to take photos or video, either. Naturally, due to lack of tablet you won't be able to see what you are recording. But there ARE hard buttons on the controller for taking video and shooting photos. You can even control exposure, shutter speed, etc. But, again, without seeing an image on a screen, one would be guessing.

D

 

[IronSky1]

Thanks good to know.

 

[Suncat33770]

You do not. Furthermore, you don't need the app to take photos or video, either. Naturally, due to lack of tablet you won't be able to see what you are recording. But there ARE hard buttons on the controller for taking video and shooting photos. You can even control exposure, shutter speed, etc. But, again, without seeing an image on a screen, one would be guessing.

D

Thank you Mr. Frank!! I trying isolate the problem. My controller does operate the camera and take photos to sd card in the camera. My controller just does not fly the drone or operate the landing gear. I guess my next step is to make sure the software/firmware in the drone and controller are compatible...
I have tried to pair the drone to the controller with little red button on the drone but the little led next to the red button drone never lite up??

again thanks again.....to everyone!!