Again if the MicroSD card is not formatted to FAT32 It will cause the same problem with these methods.
Again if the MicroSD card is not formatted to FAT32 It will cause the same problem with these methods.It did the trick! But it should have worked from the memory card/card-reader and camera then?
Again if the MicroSD card is not formatted to FAT32 It will cause the same problem with these methods.
Have now answered this here Brand New "Replacement" Camera (No Signal/Feed)!!!!!!!!!! | DJI Inspire ForumNew X3 camera "requires update" according to the app. How do you upgrade just the camera if everything has already been updated and operational previously? Used the same SD card from the previous camera that was having issues, so I'm sending it in and bought this new camera while I wait.
As requested by many, MANY of you, here are the proper directions to upgrade your firmware. These directions come directly from a well respected member of the DJI community as well as our little slice here on the forum.
"It's a very simple process. You want to load the bin file on the root of the sd card ( x:\filename.bin). I advise to ONLY power the craft and let the upgrade process start, once done you will hear a change of the beeps. The completion tone is DA (pause)... DA, DA. Once the craft is updated power down and do the TX. I use a freshly formatted USB thumb drive for the TX. Copy the same bin file to the thumb drive (x:\filename.bin). The upgrade should start after about 30sec. Once complete the TX light will turn from blue to green, upgrade complete.
I advise users to keep the bin file on the card. This allows all batteries inserted to be upgraded IF required."
Thanks Blade.
Right click on it and open it, then put it on a formated SD card.i just dragged the bin file to the card.
Thats weird it would suggest that the AC already has the latest FW... I had a problem with the app saying i needed to update the FW after i had updated... I deleted the app and downloaded it again that fixed it for me...I tried that before and just tried again. No Joy I'm afraid. its weird as i have not flown for a while and missed a few updates on this inspire. yesterday i updated to 1.3 & 1.4 without a problem, but 1.5 is not happening. I can't afford to send it away as this is the one that is insured and i need to use this one for my flight examination on wednesday to obtain my PFAW. If there are any other suggestions they would be welcomed. Thanks again.
Hi Blade....here's my problem:As requested by many, MANY of you, here are the proper directions to upgrade your firmware. These directions come directly from a well respected member of the DJI community as well as our little slice here on the forum.
"It's a very simple process. You want to load the bin file on the root of the sd card ( x:\filename.bin). I advise to ONLY power the craft and let the upgrade process start, once done you will hear a change of the beeps. The completion tone is DA (pause)... DA, DA. Once the craft is updated power down and do the TX. I use a freshly formatted USB thumb drive for the TX. Copy the same bin file to the thumb drive (x:\filename.bin). The upgrade should start after about 30sec. Once complete the TX light will turn from blue to green, upgrade complete.
I advise users to keep the bin file on the card. This allows all batteries inserted to be upgraded IF required."
Thanks Blade.
what is the exact #s for the new firmwareAs requested by many, MANY of you, here are the proper directions to upgrade your firmware. These directions come directly from a well respected member of the DJI community as well as our little slice here on the forum.
"It's a very simple process. You want to load the bin file on the root of the sd card ( x:\filename.bin). I advise to ONLY power the craft and let the upgrade process start, once done you will hear a change of the beeps. The completion tone is DA (pause)... DA, DA. Once the craft is updated power down and do the TX. I use a freshly formatted USB thumb drive for the TX. Copy the same bin file to the thumb drive (x:\filename.bin). The upgrade should start after about 30sec. Once complete the TX light will turn from blue to green, upgrade complete.
I advise users to keep the bin file on the card. This allows all batteries inserted to be upgraded IF required."
Thanks Blade.
what are the exact #s for the updated firmware for an Inspire 1 with standard cameraAs requested by many, MANY of you, here are the proper directions to upgrade your firmware. These directions come directly from a well respected member of the DJI community as well as our little slice here on the forum.
"It's a very simple process. You want to load the bin file on the root of the sd card ( x:\filename.bin). I advise to ONLY power the craft and let the upgrade process start, once done you will hear a change of the beeps. The completion tone is DA (pause)... DA, DA. Once the craft is updated power down and do the TX. I use a freshly formatted USB thumb drive for the TX. Copy the same bin file to the thumb drive (x:\filename.bin). The upgrade should start after about 30sec. Once complete the TX light will turn from blue to green, upgrade complete.
I advise users to keep the bin file on the card. This allows all batteries inserted to be upgraded IF required."
Thanks Blade.
Inspire 1 - Specs, FAQ, manual, video tutorials and DJI GO - DJIwhat is the latest upgrade for inspire 1 with regular camera the 1.4 upgrade only has pdf file on instructions where do you find the 1.4 file
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?