Firmware v1.4.0.10 - 7th Sept 2015 Released

2015.9.7
Overview： 1. All-in-One Firmware version updated to: v1.4.0.10
What’s New：
1. Added Intelligent Navigation Modes including Point of Interest and Waypoint.
2. A three minute cool down period is triggered when the gimbal is overloaded.

Bug Fixes： 1. Intelligent Flight Battery displayed inaccurate battery level after self-discharging.

Notice：
1. Users may skip updating the remote controller, as the latest firmware update does not affect the remote controller
2. It is normal for the motor to sound or the LED to blink during the update process, as the latest firmware update will affect the motor.
3. Use this version of firmware to update each of the Intelligent Flight Battery
 
Reactions: Arsh
In 1.4 on the first 2 batteries, I am seeing the instant drop for 36% to 1%. This is with a 50% and a 64% starting voltage in preparation for the calibration. If you aren't prepared for this you might want to start with fully charged batteries as recommended. Just tried a fully charged battery and it didn't occur in that instance.

Also, don't forget to recal the IMU.
 
Last edited:

Why do the instructions that come with this firmware update indicate that we should update the Remote Control?

If this is not necessary, why does DJI tell us to do this?
 
Figbar said:
Why do the instructions that come with this firmware update indicate that we should update the Remote Control?

If this is not necessary, why does DJI tell us to do this?
Click to expand...
This is DJI's roundabout way of saying that you don't need to try to update the RC because this firmware does not change it. However, as reported on another thread, if you did not update your RC with FW 1.3.0.0, you will need to do so now.
 
Thanks...I did update FW1.3.0.0. Do you know are there any instructions from DJI of any other instructions on how the waypoint or point of view functions actually work?
 
Farnk666 said:
2. It is normal for the motor to sound or the LED to blink during the update process, as the latest firmware update will affect the motor.
Click to expand...
Hope that there is anybody who can tell if this update will set the speed of the Inspire back to what it was.THNX
 
Last edited:
Why is there no follow me mode for the Inspire? Why is it only for the Phantom 3?
 
Can I up date my rc on 1.4 as I never bothered with 1.3? Or just use 1.3 to update my rc? Then 1.4 for my inspire?
 
Reactions: Blue Bird
I have tried to install new firmware 2 times at 30 minutes and nothing is happening. Does it take longer than the 25 minuets they say it will take?
 
You must log in or register to reply here.

Similar threads

New Inspire 2 Firmware Released (12/9/2021)
Replies
58
Views
14K
Inspire 2 Discussion
dougcjohn
D
H
Can't update RC FW from 01.01.0060 to 01.01.0080
Replies
0
Views
2K
Inspire 2 Discussion
hhung516
H
L
TB50 Battery and Battery Station "Safe" Firmware - Trying to answer "What Firmware Should My Batteries Be On?"
Replies
3
Views
3K
Inspire 2 Discussion
Tom4Inspire2
T
J
Firmware V01.08.01.00 required
Replies
30
Views
11K
Inspire 1 Help
FLYEYE
F
B
One motor is slower... How can I determine if it is a 3510H or 3510?
Replies
8
Views
2K
Inspire 1 Help
Brian Fist
B
Menu
Log in
Register