- Joined
- May 12, 2016
- Messages
- 40
- Reaction score
- 10
- Location
- Haleiwa, Hawaii
- Website
- www.kilinahemedia.com
Glad I could help!Thanks. I didn't know that and had not seen it until the last month.
Glad I could help!Thanks. I didn't know that and had not seen it until the last month.
I get exactly the same with my original I1 but mostly only on the second camera op controller. Makes it completely unusable as the video freezes and breaks up for 4-5 seconds at a timeI just got my Inspire 1 Pro Black and this is the video quality pretty much.. it seems to start out ok for a minute or two but then degrades into this... do you think reverting the firmware to 1.8 will solve this issue?
Try downgrading the RC to 1.6 and it should be ok.same problem here.
i downgraded the i1raw to 1.8 but had the same probleme anyway.
could the probleme be solved by changing from mov to mp4? i will try it and report tomorrow.
We might try the RC downgrade but obviously a firmware issue either on the air or ground side has messed something up. I'll try some more options shortly. SO, are you saying that you had the same issue and the RC firmware rollback worked?Try downgrading the RC to 1.6 and it should be ok.
Hi, yes by downgrading to 1.8 on aircraft and 1.6 on controller worked for me on X3 camera.We might try the RC downgrade but obviously a firmware issue either on the air or ground side has messed something up. I'll try some more options shortly. SO, are you saying that you had the same issue and the RC firmware rollback worked?
Since upgrading to the latest firmware I have had nothing but problems with image transmission dropping out intermittently. It happens at any distance between 5 m to 500 m. I am using the latest version of the DJI Go app on my iPhone and my iPad and the problem is exactly the same on either. Is anyone else experiencing something similar? This nearly ruined a shoot for me today and I have another one on Sunday. Any help would be appreciated.
it worked for me.Try downgrading the RC to 1.6 and it should be ok.
it worked for me.
just downgradete both controllers zu 1.6 and this transmission issue is gone. thanks.
my inspire FW is 1.8.1.00What FW is the bird on with the RC on 1.6?
Yes, I have a new Black Pro with X5 and 1.8.1 and 1.6 on the RC is working fine. Missing some updates to the X5 but everything else is fine.it worked for me.
just downgradete both controllers zu 1.6 and this transmission issue is gone. thanks.
We have exactly the same problem. the pilot RC video is excellent, but on the slave controller breaks up, so as you say impossible to film that way. We swapped the Master & slave IPads just to check and nothing changed. Either we have a defective RC or the slave RC is getting some sort of interference from the Pilot (master) RC.I get exactly the same with my original I1 but mostly only on the second camera op controller. Makes it completely unusable as the video freezes and breaks up for 4-5 seconds at a time![]()
Absolutely correct - I have explained this so many times on the forum I have given up.Slave controller video breakups have been there from day 1, are unrelated to the mobile device used, and have never been fixed. Simply not a usable setup.
We use essential cookies to make this site work, and optional cookies to enhance your experience.