Hi, just got a used inspire 1 v1.0. The drone and controller power on and make sounds etc perfectly normally. The controller is in slave/unconnected mode with a purple light. Unfortunately it is not connecting to my phone(s). It's not even charging the phone it so I thought there was something wrong with the usb ports. After searching the forum there seems to be a way to download firmware onto it as that may be the issue.
I just need some help with doing that. Is it done through a usb stick or do I have to connect it to some pins on the board, and which board (there are 2 in the usb area). Any pointers/directions are greatly appreciated.
Thank you for your time!
EDIT: I got the controller to start charging the phone by switching cables and phone but it still does not show up as anything on the app. I tried to roll firmware back using this: Downgrading firmware on P3P from 1.10.9 to 1.7.6
but it did not show up as anything on the DJI go app.
Not sure what to do, can I download software via usb?
Edit:
Figured out how to do the firmware update, but just one issue. I can't find version v1.3.0.00 anywhere online, tried some old forums, links lead to dead ends, tried wayback on DJI, doesn't go far enough. If anyone has a copy of firmware v1.3.0.00 I would really appreciate it if you could send that over my way.
Thank you for your time!
Edit 2:
Found the firmware (Down below)!! I know, pretty quick update, idk ive got caffeine gushing through my system.
Unfortunately I put it into a microsd card and used a usb/sd card reader to put it into the controller but nothing happened. Any tips/tricks? Any help is greatly appreciated.
Thank you!
Wayback Machine
I just need some help with doing that. Is it done through a usb stick or do I have to connect it to some pins on the board, and which board (there are 2 in the usb area). Any pointers/directions are greatly appreciated.
Thank you for your time!
EDIT: I got the controller to start charging the phone by switching cables and phone but it still does not show up as anything on the app. I tried to roll firmware back using this: Downgrading firmware on P3P from 1.10.9 to 1.7.6
but it did not show up as anything on the DJI go app.
Not sure what to do, can I download software via usb?
Edit:
Figured out how to do the firmware update, but just one issue. I can't find version v1.3.0.00 anywhere online, tried some old forums, links lead to dead ends, tried wayback on DJI, doesn't go far enough. If anyone has a copy of firmware v1.3.0.00 I would really appreciate it if you could send that over my way.
Thank you for your time!
Edit 2:
Found the firmware (Down below)!! I know, pretty quick update, idk ive got caffeine gushing through my system.
Unfortunately I put it into a microsd card and used a usb/sd card reader to put it into the controller but nothing happened. Any tips/tricks? Any help is greatly appreciated.
Thank you!
Wayback Machine
