Inspire 2 Extended Landing Gear

[FlyHighUSA]

Hey Guys and Gals, for sometime now I have been wanting to design an extended landing gear system for the Inspire 2. It’s finally here, these are made from Onyx and carbon fiber solid strand. The standard rise is half an inch. We can do custom sizes if needed pretty much any length within reason. I was tired of my ex seven and X5S camera body and lens is being so close to the ground. Always worrying about where our land etc. This is a great solution to that problem. These are made in house at FlyHighUSA and are 100 percent American Made!!! There is a 5 to 7 day lead time for orders. We have began production as of this week.

https://flyhighusa.com/product/flyhighusa-inspire-2-extended-landing-gear-1-2/

 

[Droneyboy]

Will the I2 fit in it's standard case with the 1/2 inch ones on?

 

[FlyHighUSA]

Will the I2 fit in it's standard case with the 1/2 inch ones on?

Yes it does

 

[Cruncher]

Yes it does

$29.99 each?

 

[FlyHighUSA]

$29.99 each?

No sir that is for a full set of 4

 

[Dr. Ifly Drones]

Nice Ralph! Have you mocked any up to see how high they can be before you start seeing them in camera pans?

 

[FlyHighUSA]

Nice Ralph! Have you mocked any up to see how high they can be before you start seeing them in camera pans?

Hu buddy, Thanks a bunch , yes I really like them. If you do not point the camera up you can do 1” rise without getting into the camera view. I tested this several times.

 

[FlyHighUSA]

I did several 360 pans with the camera slightly pointed up and at a 1 inch rise I did not get any interference with the shot. It only came in to view when I did an extreme up position.

 

[FlyHighUSA]

I can do custom rises as needed.

 

[Dr. Ifly Drones]

Hu buddy, Thanks a bunch , yes I really like them. If you do not point the camera up you can do 1” rise without getting into the camera view. I tested this several times.

Throw a set of the 1" rise in with the Patch when you send it back. I think you have my info.

 

[FlyHighUSA]

Ok buddy I’ll get you a set made.

 

[CvdL]

Will these also fit on the Inspire 1?

 

[FlyHighUSA]

Will these also fit on the Inspire 1?

I could do you a custom sit like these for the inspire 1 but these particular ones are custom made for the inspire 2. The nice thing about these landing gear is they can be made custom heights to your specifications