Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Landing gear not reaponding

Joined
Feb 10, 2019
Messages
1
Reaction score
0
Age
33
Hello fellow droners, im having an issue with my inspire 1, my landing gear is not working at all. The landing gear is in the down posistion and still flys but will not go into travel mode and will not raise at all.

I tried spinning the screw under the inspire to manually move it with no avail. This is definitely a problem. Please help.
 
Joined
Nov 1, 2016
Messages
42
Reaction score
15
Age
33
first i would check the servo wire connection. then omn out that connection just 3 normal servo wires and last vpu issues but go from there sir.
 
Joined
Nov 1, 2016
Messages
42
Reaction score
15
Age
33
Hello fellow droners, im having an issue with my inspire 1, my landing gear is not working at all. The landing gear is in the down posistion and still flys but will not go into travel mode and will not raise at all.

I tried spinning the screw under the inspire to manually move it with no avail. This is definitely a problem. Please help.
oh and the obvious chk for worm screw obstruction
 
Joined
May 14, 2015
Messages
220
Reaction score
42
Location
East Sussex, UK
Can you hear the motor turning even though the legs aren't moving?

If so then it could be that that the gear on top of the worm screw has come loose - it's only an interference fit. This happened to me last year and I ended up having to change the Centre Frame Component part 2. Quite an expensive repair, especially if you use a service agent to do it.

Good luck
 

New Threads

Forum statistics

Threads
18,893
Messages
186,221
Members
27,712
Latest member
louisg