After the last issue with Firmware Updates for the batteries, I am posting my experience with the latest updates. When I went for a fly today (2.00pm Melbourne Australia time - 4 March), I was advised a firmware update was necessary. I proceeded to do this once I returned home. The update was for the RC, aircraft and my 3 sets of batteries. I did the RC first, with the iPad connected to the RC and a good WiFi signal, and all went well. I next did the aircraft and was advised during the update process to connect my iPad directly to the aircraft using the USB port on the starboard side of the aircraft and put the switch, just above the USB port, into the "up" position. All continued to go well and I noticed some text on the iPad that the batteries were being updated. Once everything went successfully, I simply changed to next pair of batteries with the iPad still connected to the aircraft and received a message about incompatible firmware. I acknowledged this on the iPad and the batteries were then updated, in about a minute. Exactly the same for third set of batteries.
I had no problems at all. My current versions are Aircraft 01.00.0240, RC 01.00.0110, RAW Module 01.32.49.98 and Camera (X4S) 01.02.15.04. My App is version 4.0.4.
A quick test flight and all is well.
Good luck
I had no problems at all. My current versions are Aircraft 01.00.0240, RC 01.00.0110, RAW Module 01.32.49.98 and Camera (X4S) 01.02.15.04. My App is version 4.0.4.
A quick test flight and all is well.
Good luck