New to this Inspire 1 Pro with Zeumuse X5. I purchased used from a person that upgraded to the I2. Anyway with dual controllers I decided to try out an inexpensive Lenovo TAB3 Essential from Amazon. I will not link or start the DJI Go app when the RC turn on. Found that if you unplug then plug back in the app will then start. I have run into this before but cannot remember where in the tablet settings the auto start or what needs to be changed to make this happen. When I re-plug in the DJI Go and my Litchi app comes up and then can pick which one I want to use. I also used my Samsung S8 phone and this works like it should.
The Lenovo seems to work pretty good for a $69.99 tablet.
I also have the Mavic and Phantom 4 and they work fine with the phone, haven't tried the Lenovo yet.
Greatly appreciate and suggestions getting the settings corrected.
The Lenovo seems to work pretty good for a $69.99 tablet.
I also have the Mavic and Phantom 4 and they work fine with the phone, haven't tried the Lenovo yet.
Greatly appreciate and suggestions getting the settings corrected.
