New Firmware v1.3.0.00 Aug 4 2015

Luis Morales · Aug 4, 2015

tassieflyer said:
I just downloaded GS for DJI from the App Store. Still setting up for new Go App & getting my head around all the new stuff. Can anybody comment on GS App?

GS app? that is still the old one, they have not released waypoint for the inspire yet, just by third parties using the sdk.

tassieflyer · Aug 4, 2015

Thanks

Luis Morales said:
GS app? that is still the old one, they have not released waypoint for the inspire yet, just by third parties using the sdk.

Thanks for the heads up Luis. I wasn't aware it's an old app. Just got excited when downloading the Go App when the App Store suggested GS. I thought it was all part of a bundle. It does state in the features of the GS App that it has multiple way points. Maybe this one has been upgraded?

damoncooper · Aug 4, 2015

The GS app isn't for the Inspire. It's an old version for the Bluetooth GroundStation module used on Phantom 2's and higher end DJI birds.

The GS functionality will (presumably) be delivered in the GO app (but I don't know that for sure).

It's "coming soon".

Luis Morales · Aug 4, 2015

tassieflyer said:
Thanks

Thanks for the heads up Luis. I wasn't aware it's an old app. Just got excited when downloading the Go App when the App Store suggested GS. I thought it was all part of a bundle. It does state in the features of the GS App that it has multiple way points. Maybe this one has been upgraded?

the app store shows the date of the last update, it still shows may 8th 2015

PB30X · Aug 4, 2015

tassieflyer said:
Thanks

Thanks for the heads up Luis. I wasn't aware it's an old app. Just got excited when downloading the Go App when the App Store suggested GS. I thought it was all part of a bundle. It does state in the features of the GS App that it has multiple way points. Maybe this one has been upgraded?

The GS app you downloaded is for the P2, and currently unavailable for the inspire 1.. The GS app will not likely even work with the inspire 1..

tassieflyer · Aug 4, 2015

PB30X said:
The GS app you downloaded is for the P2, and currently unavailable for the inspire 1.. The GS app will not likely even work with the inspire 1..

Thanks again everybody. I'll clam down.

RJ Evans · Aug 4, 2015

Well... Finally got Go on my iPad mini 2's. Update went smooth as silk on AC, RC, and Batts. Can't recal batts until rain goes away. Thought about an indoor discharge to 5% without props at full throttle with fan blowing on AC. Thoughts?

sirnikolas · Aug 4, 2015

RJ Evans said:
Well... Finally got Go on my iPad mini 2's. Update went smooth as silk on AC, RC, and Batts. Can't recal batts until rain goes away. Thought about an indoor discharge to 5% without props at full throttle with fan blowing on AC. Thoughts?

I wouldn't do that. Just be patient and discharge your batteries as recommended by DJI.

dobjw · Aug 4, 2015

damoncooper said:
It's "coming soon".

Lol

RJ Evans · Aug 4, 2015

sirnikolas said:
I wouldn't do that. Just be patient and discharge your batteries as recommended by DJI.

Was already leaning heavily in that direction.

Thanks for your input.

lake_flyer · Aug 4, 2015

RJ Evans said:
Well... Finally got Go on my iPad mini 2's. Update went smooth as silk on AC, RC, and Batts. Can't recal batts until rain goes away. Thought about an indoor discharge to 5% without props at full throttle with fan blowing on AC. Thoughts?

It will take like forever, per battery, without the drag of the props.
Motors will become very hot. I would advice against it.

CaptainBadge · Aug 4, 2015

sirnikolas said:
I wouldn't do that. Just be patient and discharge your batteries as recommended by DJI.

Do a few laps around the living room!

Dr_Dooms · Aug 4, 2015

If you have space in your house, just power it up and hover like a foot off of the ground. maybe in your garage or on your porch would work?

I feel your struggle here in Florida. It has no joke rained every single day for the past two months.

sirnikolas · Aug 4, 2015

CaptainBadge said:
Do a few laps around the living room!

Lol! Great idea but I won't be updating. Not yet anyway.

airdrone · Aug 4, 2015

Aircraft firmware can only be downgraded to v1.2.106 or later.

Since I have the first firmware that was released, it means that you can downgrade to the first firmware ??

RJ Evans · Aug 4, 2015

CaptainBadge said:
Do a few laps around the living room!

I'm actually considering it.

Dr_Dooms · Aug 4, 2015

Just flew my i1 with the new firmware. Everything went well, no problems that I noticed so far.
The only thing I noticed that was different, in GPS mode I couldn't make it over 39.8mph
The wind was completely dead, before I could hit more like 44-45mph

Arsh · Aug 4, 2015

@Dr_Dooms did you get a chance to recalibrate your batteries? If so did you see any affects of flight time?

AndyH · Aug 4, 2015

Currently I only have android. I'm on the fence about updated firmware without getting the GO App. Any thoughts?

Dr_Dooms · Aug 4, 2015

Arsh said:
@Dr_Dooms did you get a chance to recalibrate your batteries? If so did you see any affects of flight time?

I did the calibration when I was testing it. on my TB47 I got 17 minutes and on my TB48 I got 19 minutes. I'm curious to see what the times are after I recharge and fly again.
When I was testing and doing the calibration I was constantly moving, flying around an open field.