Recent content by JOEREZ1XM

I have a similar setup weighs 702g with 5550mah, your 2 battery pack 3S setup will still only have 5000mah total and has to be wired in series and you have to charge both every time. It would be easier to just use a single 6S pack, I was able to get 25 minutes full throttle the entire time and...

You probably aren't transferring enough heat to the piece you're soldering to. When I first did the battery mods, to actual batteries, I was using a smaller tip at 350 Celsius and could not melt the original solder on the terminals, I got bigger station that uses larger tips that hold and...

Is there any information regarding the battery used or made for the 43 minute flight time?

See if he would join this forum and post his mod details.

What is the actual weight of those two batteries?

Got it, like this

Could you use one of the pictures I found online of the Inspire 1 main board and show or explain where you made the solder connections to the actual board?

I have Gimbal wheel speed set at 40 which is good, I'm talking about when you hold your finger on the screen to manipulate the gimbal.

I just did a hover test today, achieved 30:22 minutes and it was quite windy at times, I have an Inspire 1 - X3 camera and newly added Lynh Phan adapters with 14x4.8 Carbon Fiber T-Motor props. Landed at 10% and 9% left in auxiliary battery. I had done a 100% throttle test with my setup on page...

I use MaxAmp batteries in a single setup. What is the capacity of the ones you are using?

Can you post picture of battery mounting location and confirm weight of the battery?

Damon, Do you know what the highest voltage is, that would not cause an over voltage condition? You say 30.45v triggers an error and partially depleted battery pack at 28v works, would 29.4v work. After reading, I was thinking of trying a non high voltage 7S pack with a high C rating, each cell...

Just finished another flight test with my 5550mah battery. 100% throttle almost the whole time, made it 30,153 FT one way, total flight distance 75,160 FT, 24:28 flight time, with a light crosswind. My auxiliary battery had 7% left at the end and TB48 had 9%, I was thinking of having a 7400mah...

What exactly is the concept, I don't understand the setup you're trying to do?

What are you testing, looks like a regular auxiliary battery. Keep us posted.