Own a DJI drone? Don't miss the fun to look at the world from the surreal first person perspective.
I bought the goggles in late September from Amazon for $449. I have since only used them twice with about 8 cumulative hours. As you can see, I barely use these awesome goggles. Therefore, I have...
Hi guys,
I have an Inspire 1 with X5R, I would be open to offers, or a straight swap for Inspire 2 with X4S camera.
The kit included is listed below:
Dji Inspire 1
X5R camera
2 x 512GB cards,
Card reader for computer
2 TB 47 Batteries
Smart charger
Multi charger
2 sets of props
2 x...
I recently updated CS and RC.
Now, sometimes, they cannot connect. CS thinks that RC is computer and give me USB message ..
I think that firmware of CrystalSky is problem.
On DJI forum nothing concrete....obvious, until new firmware, I will have problem.
I have an I2 with x5s. I have about 4 weeks left on my DJI Care and then it expires.
I can't imagine flying my I2 without coverage for accidents, etc. That seems crazy to me. What is the best solution for insurance to cover damage, flyaways, etc. after DJI Care expires?
Thanks so much!
Mark
I have an extra Crystalsky mounting bracket that fits Phantom, Inspire 1, and Inspire 2 remote controllers for sale.
It’s new just have an extra one.
$55 shipped in USA.
Located San Antonio, TX
Thanks!
Hi Im selling my spare set of new 2 pairs of Carbon Fiber folding propellers 2 CW and 2 CCW they are very well made and balanced they screw directly to the Inspire 2 motors no more dealing with DJI plastic props that rattle or wear out, no more need to install or un install propellers just un...
Hopefully DJI has someone monitoring this forum. I have had a P1, P2, P4, Inspire 1, and now a Mavic Pro (for travelling) and an Inspire 2 for more serious work. I do flying and film making as a hobby and use the quad-copters to enhance my home movies and for general enjoyment. The POI has been...
Overview
Date: 2017.11.13
Aircraft Firmware: V01.01.0200
Remote Controller Firmware: V01.01.0002
DJI GO 4 app: iOS V 4.1.14 or above, Android V 4.1.14 or above
What’s New
Added support for the Zenmuse X7 gimbal and camera.
CineCore 2.1 now features an updated camera processing system, which...
Hoping someone can help me out.
Im using an inspire 2 with the standard controller and Ipad as the master and a cendence controller with Crystalsky for the slave.
The issue I'm having is that the preset camera buttons/rotary knob and the focus knob don't do anything at all.
It was all working...
For Sale:
Both in Excellent condition and fully functional. Paypal. Will ship to Verified Shipping Address Only. Located in Springfield, MA
- DJI Inspire 2 Controller w/ Tablet Mount and GPS - $330 USD
- DJI X4S Camera w/ Box - $375 USD
I have a fresh from DJI Unopened inspire 2 for sale. It was sent in because of the dreaded glue issue and was fixed under warranty. I haven't opened the box yet :)
It will come with the DJI inspire 2 and DJI x4s camera only. I picked up another body so I'm keeping the remote and the batteries...
I made a new mount and this time the attachment piece swivels into place and is attached with a second screw. The 1/4-20 tripod adapter came and I can finally mount my Gear 360 camera! Of course its dark now, b but hoping to post footage tomorrow sometime. I'm also thinking I will need an...
I've made a few of these already and decided to offer them up to others who may be interested.
It's a custom designed 3D printed mount plate that attaches under the Inspire 2 (haven't tried it on a Inspire 1 yet, would be willing to send one to someone who has an Inspire 1 to give me...
I am looking to purchase an Inspire 2. Never crashed. Willing to pay for additional batteries and slave remote if They are part of the package. Shipped to 28443 (USA) Please pm me with price and picture of the flight log.
So I just wanted to test the waters for interest before I make the investment to build this mounts. I just had a baby and desperately need to make more money on the side, so here goes. This is a prototype so I used the glow in the dark filament already loaded into the 3D Printer. I plan on...
Has anyone attempted to harvest the core components out of an Inspire 2 to create a custom camera rig? I'm interested in using the X5S and X7 gimbals in an industrial application and am wondering how practical it would be to disassemble and extract the I2 flight controller, lightbridge...
Hi everyone,
I joined this forum recently because I'm heavily considering making the jump from my Phantom 4 to an Inspire 2. I do video production and photography for a living, and started incorporating aerial into my business this Spring when I passed the 107. Currently its a somewhat small...
Just a heads up: The FPV Liveview only has one option for position on your screen when using the 5.5"
CSky: STRAIGHT IN THE MIDDLE.
I was really looking forward to using the picture-in-picture ability of the FPV camera and the main X5s view together; now, it's practically useless.
When viewing...