1345T CW Props Loose and Rattling

[ace1]

This is sort of a repost however I was not clear about the issue in my earlier post. It's now deleted.

Only my clockwise props are having this issue. They wiggle in the prop lock and rattle when hand spun. Anyone know a solution? The counter clockwise propellers are very tight. I'm worried about flying with these loose props.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[dr.D]

Hi ace1,
Look at my similar thread on the DJI forum.
It might help.

 

[DesertWindAero]

Hi ace1,
Look at my similar thread on the DJI forum.
It might help.

A link would be helpful to him and others interested.

 

[dr.D]

? I haven't said it is a Phantom problem...look at my avatar

Here is the link:

DJI Forum|Rattling noise from prop

 

[Fastrack]

Does the center part of the lock move at all? The part with the two screws tightens down on the spring inside, which in turn applies pressure to the outside moveable piece. If it's loose I'd remove the screws and put a small dab of blue loctite and retighten, otherwise order 2 sets of locks (the locks are a pair of cw and ccw)

Unless there's something wrong with the hub inside the prop?

Ben