Balancing Props on V2

B

BoulderChris

Joined

Feb 19, 2016

Messages

6

Reaction score

0

Age

60

• Feb 21, 2016

• #1

I can't find a rod that fits into the new Inspire 1 v2 quick release props. Any thoughts?

 

unyks

Joined

Jan 28, 2016

Messages

354

Reaction score

179

• Feb 21, 2016

• #2

check this THREAD out

chris

 

B

BoulderChris

Joined

Feb 19, 2016

Messages

6

Reaction score

0

Age

60

• Feb 21, 2016

• #3

Thanks, I ordered that one but it comes with a small circular end that doesn't match the larger rectangular slot on the props.

 

L

Lee

Joined

Mar 20, 2015

Messages

27

Reaction score

7

• Feb 21, 2016

• #4

BoulderChris said:

Thanks, I ordered that one but it comes with a small circular end that doesn't match the larger rectangular slot on the props.

Click to expand...

That rod is designed to balance the props ON the hubs. Just did mine and two sets were extremely out of balance. It works beautifully.

 

B

BoulderChris

Joined

Feb 19, 2016

Messages

6

Reaction score

0

Age

60

• Feb 21, 2016

• #5

So you take the hubs off the Inspire?

 

L

Lee

Joined

Mar 20, 2015

Messages

27

Reaction score

7

• Feb 21, 2016

• #6

BoulderChris said:

So you take the hubs off the Inspire?

Click to expand...

Yes. Assemble the lock / hub / prop and then balance as a one piece unit. This way you are balancing all parts that rotate on the motor. I even marked which props go with each hub assembly so that I always use the same set that were balanced together initially.

 

Last edited: Feb 21, 2016